Tornado

More documents

Recommendations

Info

Tornado 2.0 User’s Guide etherfind This command can be used on many UNIX systems to watch all traffic on a network. You must have root access to execute etherfind. For example, to monitor traffic between mars and phobos from a third machine, enter the following: # etherfind between mars phobos Using interface le0 icmp type lnth proto source destination src port dst port 60 tcp mars phobos 1022 login 60 tcp phobos mars login 1022 60 tcp mars phobos 1022 login ... etherfind displays the packet length, the protocol (for example, TCP, UDP), the source and destination machine names, and the source and destination ports. netstat This command displays network status reports. The -r option displays the network routing tables. This is useful when gateways are used to access the target. In the following example, this node sends packets for 91.0.10.34 through gateway vx210: % netstat -r Routing tables Destination Gateway Flags Refcnt Use Interface 91.0.10.34 vx210 UG 0 0 le0 Target-Server Problems ■ Check Back-End Serial Port. If you use a WDB Serial connection to the target, make sure you have connected the serial cable to a port on the target system that matches your target-agent configuration. The agent uses serial channel 1 by default, which is different from the channel used by VxWorks as a default console (channel 0). Your board’s ports may be numbered starting at one; in that situation, VxWorks channel one corresponds to the port labeled “serial 2.” ■ Verify Path to VxWorks Image. The target server requires a host-resident image of the VxWorks run-time system. By default, it obtains a path for this image from the target agent (as recorded in the target boot parameters). In some cases (for example, if the target boots from a local 62
2 Setup and Startup device), this default is not useful. In that situation, use the Core file field in the Create Target Server form (3.5 Managing Target Servers, p.72) or the equivalent -c option to tgtsvr (D. Tornado Tools Reference) to specify the path to a host-resident copy of the VxWorks image. 2 2.10.2 Technical Support If you have questions or problems with Tornado or with VxWorks after completing the above troubleshooting section, or if you think you have found an error in the software, contact the Wind River Systems technical support organization. Your comments and suggestions are welcome as well. The Tornado launcher has facilities to help you submit trouble reports; you can use them even if you were unable to hook up a target. See 9. Customer Service. 63
Page 1 and 2:
Tornado User’s Guide (UNIX Versio
Page 3:
Documentation Guide ...............
Page 6 and 7:
Tornado 2.0 User’s Guide 1.5 Host
Page 8 and 9:
Tornado 2.0 User’s Guide 2.9 Torn
Page 10 and 11:
Tornado 2.0 User’s Guide 4.3.5 Bu
Page 12 and 13:
Tornado 2.0 User’s Guide 5.3.9 Am
Page 14 and 15:
Tornado 2.0 User’s Guide 7.1 Intr
Page 16 and 17:
Tornado 2.0 User’s Guide 9.2.1 Th
Page 18 and 19:
Tornado 2.0 User’s Guide xviii
Page 20 and 21:
Tornado 2.0 User’s Guide ■ ■
Page 22 and 23:
Tornado 2.0 User’s Guide VxWorks
Page 24 and 25:
Tornado 2.0 User’s Guide GNU Tool
Page 26 and 27:
Tornado 2.0 User’s Guide xxvi
Page 28 and 29:
Tornado 2.0 User’s Guide and the
Page 30 and 31:
Tornado 2.0 User’s Guide developm
Page 32 and 33:
Tornado 2.0 User’s Guide Project
Page 34 and 35:
Tornado 2.0 User’s Guide From you
Page 36 and 37:
Tornado 2.0 User’s Guide Target A
Page 38 and 39: Tornado 2.0 User’s Guide It is re
Page 40 and 41: Tornado 2.0 User’s Guide Third-Pa
Page 42 and 43: Tornado 2.0 User’s Guide 16
Page 44 and 45: Tornado 2.0 User’s Guide 4. Insta
Page 46 and 47: Tornado 2.0 User’s Guide % setenv
Page 48 and 49: Tornado 2.0 User’s Guide The foll
Page 50 and 51: Tornado 2.0 User’s Guide ! WARNIN
Page 52 and 53: Tornado 2.0 User’s Guide File Ser
Page 54 and 55: Tornado 2.0 User’s Guide 2.4.3 Co
Page 56 and 57: Tornado 2.0 User’s Guide Figure 2
Page 60 and 61: Tornado 2.0 User’s Guide using th
Page 62 and 63: Tornado 2.0 User’s Guide As a fur
Page 64 and 65: Tornado 2.0 User’s Guide NOTE: Th
Page 66 and 67: Tornado 2.0 User’s Guide For more
Page 68 and 69: Tornado 2.0 User’s Guide trailing
Page 70 and 71: Tornado 2.0 User’s Guide Communic
Page 72 and 73: Tornado 2.0 User’s Guide program
Page 74 and 75: Tornado 2.0 User’s Guide 2.6.3 Bo
Page 76 and 77: Tornado 2.0 User’s Guide inet on
Page 80 and 81: Tornado 2.0 User’s Guide The only
Page 84 and 85: Tornado 2.0 User’s Guide 2.10 Tro
Page 86 and 87: Tornado 2.0 User’s Guide If the t
Page 90 and 91: Tornado 2.0 User’s Guide 64
Page 92 and 93: Tornado 2.0 User’s Guide The Torn
Page 94 and 95: Tornado 2.0 User’s Guide Tornado
Page 98 and 99: Tornado 2.0 User’s Guide 3.5 Mana
Page 102 and 103: Tornado 2.0 User’s Guide The foll
Page 104 and 105: Tornado 2.0 User’s Guide from tar
Page 106 and 107: Tornado 2.0 User’s Guide Backend
Page 108 and 109: Tornado 2.0 User’s Guide 3.5.2 Sh
Page 110 and 111: Tornado 2.0 User’s Guide FTP WRS
Page 112 and 113: Tornado 2.0 User’s Guide Table 3-
Page 114 and 115: Tornado 2.0 User’s Guide entries
Page 116 and 117: Tornado 2.0 User’s Guide exec $ed
Page 118 and 119: Tornado 2.0 User’s Guide ! WARNIN
Page 120 and 121: Tornado 2.0 User’s Guide BSP A Bo
Page 128 and 129: Tornado 2.0 User’s Guide The firs
Page 132 and 133: Tornado 2.0 User’s Guide If you d
Page 134 and 135: Tornado 2.0 User’s Guide Building
Page 136 and 137: Tornado 2.0 User’s Guide You can
Page 138 and 139:
Tornado 2.0 User’s Guide Figure 4
Page 140 and 141:
Page 142 and 143:
Tornado 2.0 User’s Guide prjConfi
Page 144 and 145:
Tornado 2.0 User’s Guide Finding
Page 146 and 147:
Tornado 2.0 User’s Guide When a c
Page 148 and 149:
Tornado 2.0 User’s Guide selectio
Page 150 and 151:
Tornado 2.0 User’s Guide Changing
Page 152 and 153:
Tornado 2.0 User’s Guide vxWorks_
Page 154 and 155:
Tornado 2.0 User’s Guide about co
Page 156 and 157:
Page 158 and 159:
Tornado 2.0 User’s Guide value of
Page 160 and 161:
Tornado 2.0 User’s Guide buttons
Page 162 and 163:
Tornado 2.0 User’s Guide NOTE: Fo
Page 164 and 165:
Tornado 2.0 User’s Guide on the s
Page 166 and 167:
Tornado 2.0 User’s Guide space—
Page 168 and 169:
Page 170 and 171:
Tornado 2.0 User’s Guide sysHwIni
Page 172 and 173:
Tornado 2.0 User’s Guide TSFS Boo
Page 174 and 175:
Tornado 2.0 User’s Guide 148
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Tornado 2.0 User’s Guide HTML Hel
Page 182 and 183:
Tornado 2.0 User’s Guide Table 5-
Page 184 and 185:
Tornado 2.0 User’s Guide Task Inf
Page 186 and 187:
Tornado 2.0 User’s Guide System I
Page 188 and 189:
Tornado 2.0 User’s Guide This exa
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Tornado 2.0 User’s Guide Resolvin
Page 196 and 197:
Tornado 2.0 User’s Guide 5.2.6 Us
Page 198 and 199:
Tornado 2.0 User’s Guide -> taskI
Page 200 and 201:
Tornado 2.0 User’s Guide -> taskS
Page 202 and 203:
Page 204 and 205:
Tornado 2.0 User’s Guide Variable
Page 206 and 207:
Tornado 2.0 User’s Guide simply s
Page 208 and 209:
Tornado 2.0 User’s Guide 5.3.6 As
Page 210 and 211:
Tornado 2.0 User’s Guide After ex
Page 212 and 213:
Tornado 2.0 User’s Guide For the
Page 214 and 215:
Page 216 and 217:
Tornado 2.0 User’s Guide Scripts
Page 218 and 219:
Tornado 2.0 User’s Guide xmin( )r
Page 220 and 221:
Tornado 2.0 User’s Guide the host
Page 222 and 223:
Page 224 and 225:
Tornado 2.0 User’s Guide 5.7 Tcl:
Page 226 and 227:
Tornado 2.0 User’s Guide Tcl: Cal
Page 228 and 229:
Tornado 2.0 User’s Guide to autom
Page 230 and 231:
Tornado 2.0 User’s Guide shell of
Page 232 and 233:
Page 234 and 235:
Tornado 2.0 User’s Guide 6.2 Star
Page 236 and 237:
Tornado 2.0 User’s Guide Show box
Page 238 and 239:
Tornado 2.0 User’s Guide Browser
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Tornado 2.0 User’s Guide As well
Page 246 and 247:
Page 248 and 249:
Tornado 2.0 User’s Guide The obje
Page 250 and 251:
Tornado 2.0 User’s Guide Default
Page 252 and 253:
Tornado 2.0 User’s Guide 6.10 The
Page 254 and 255:
Tornado 2.0 User’s Guide 6.12.2 S
Page 256 and 257:
Page 258 and 259:
Tornado 2.0 User’s Guide Example
Page 260 and 261:
Tornado 2.0 User’s Guide 7.2 Star
Page 262 and 263:
Tornado 2.0 User’s Guide The comm
Page 264 and 265:
Tornado 2.0 User’s Guide pointer
Page 266 and 267:
Page 269 and 270:
7 Debugger Tcl Menu The Tcl menu pr
Page 271 and 272:
7 Debugger The debugger uses the sa
Page 273 and 274:
7 Debugger Then select the breakpoi
Page 275 and 276:
7 Debugger Moves one level down the
Page 277 and 278:
7 Debugger You can click on any fol
Page 279 and 280:
7 Debugger GDB Initialization Files
Page 281 and 282:
7 Debugger form filename:num (the s
Page 283 and 284:
7 Debugger and rev, discussed alrea
Page 285 and 286:
7 Debugger ■ Shell Commands You c
Page 287 and 288:
7 Debugger wtx-tool-name The name s
Page 289 and 290:
7 Debugger Displaying Summary Threa
Page 291 and 292:
7 Debugger Internally, the debugger
Page 293 and 294:
7 Debugger (gdb) tclproc mld mload
Page 295 and 296:
7 Debugger gdbEvalScalar exprlist E
Page 297 and 298:
7 Debugger gdbSymbolExists symbolNa
Page 299 and 300:
7 Debugger 7.7 Tcl: CrossWind Custo
Page 301 and 302:
7 Debugger Most of the examples in
Page 303 and 304:
7 Debugger } {button "OK" -left 2 -
Page 305 and 306:
8 Customization 8.1 Introduction To
Page 307 and 308:
8 Customization 8.3 Setting Version
Page 309 and 310:
8 Customization 8.4.1 The Customize
Page 311 and 312:
8 Customization Close Window On Exi
Page 313 and 314:
8 Customization Version Control Thi
Page 315 and 316:
8 Customization Figure 8-9 Object-M
Page 317 and 318:
8 Customization information about t
Page 319 and 320:
9 Customer Service 9.1 Introduction
Page 321 and 322:
9 Customer Service Support>WindView
Page 323 and 324:
9 Customer Service Figure 9-2 Form:
Page 325 and 326:
9 Customer Service Description of P
Page 327 and 328:
9 Customer Service dialog. Use this
Page 329:
Appendices 303
Page 332 and 333:
Tornado 2.0 User’s Guide Table A-
Page 334 and 335:
Tornado 2.0 User’s Guide A.3 Targ
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Tornado 2.0 User’s Guide A.4 Init
Page 342 and 343:
Page 344 and 345:
Tornado 2.0 User’s Guide includin
Page 346 and 347:
Tornado 2.0 User’s Guide example,
Page 348 and 349:
Tornado 2.0 User’s Guide nested c
Page 350 and 351:
Tornado 2.0 User’s Guide For exam
Page 352 and 353:
Tornado 2.0 User’s Guide B.3.1 Tc
Page 354 and 355:
Tornado 2.0 User’s Guide ■ Erro
Page 356 and 357:
Tornado 2.0 User’s Guide Variable
Page 358 and 359:
Tornado 2.0 User’s Guide Indentat
Page 360 and 361:
Tornado 2.0 User’s Guide ■ Comm
Page 362 and 363:
Tornado 2.0 User’s Guide ■ if t
Page 364 and 365:
Page 366 and 367:
Tornado 2.0 User’s Guide icmpstat
Page 368 and 369:
Tornado 2.0 User’s Guide Typograp
Page 370 and 371:
Tornado 2.0 User’s Guide may be s
Page 372 and 373:
Tornado 2.0 User’s Guide crosswin
Page 374 and 375:
Tornado 2.0 User’s Guide ENVIRONM
Page 376 and 377:
Tornado 2.0 User’s Guide launch N
Page 378 and 379:
Tornado 2.0 User’s Guide (because
Page 380 and 381:
Tornado 2.0 User’s Guide ENVIRONM
Page 382 and 383:
Tornado 2.0 User’s Guide Locating
Page 384 and 385:
Tornado 2.0 User’s Guide Use the
Page 386 and 387:
Tornado 2.0 User’s Guide actions
Page 388 and 389:
Tornado 2.0 User’s Guide -f forma
Page 390 and 391:
Tornado 2.0 User’s Guide tgtsvr -
Page 392 and 393:
Tornado 2.0 User’s Guide - UNIFOR
Page 394 and 395:
Tornado 2.0 User’s Guide windsh N
Page 396 and 397:
Tornado 2.0 User’s Guide w() - pr
Page 398 and 399:
Tornado 2.0 User’s Guide int ) ->
Page 400 and 401:
Tornado 2.0 User’s Guide value =
Page 402 and 403:
Tornado 2.0 User’s Guide -n | -no
Page 404 and 405:
Tornado 2.0 User’s Guide agentMod
Page 406 and 407:
Tornado 2.0 User’s Guide To execu
Page 408 and 409:
Tornado 2.0 User’s Guide c( ) NAM
Page 410 and 411:
Tornado 2.0 User’s Guide DEFICIEN
Page 412 and 413:
Tornado 2.0 User’s Guide DESCRIPT
Page 414 and 415:
Tornado 2.0 User’s Guide To execu
Page 416 and 417:
Tornado 2.0 User’s Guide help Pri
Page 419 and 420:
C Tornado Tools Reference EXAMPLE R
Page 421 and 422:
C Tornado Tools Reference RETURNS S
Page 423 and 424:
C Tornado Tools Reference DESCRIPTI
Page 425 and 426:
Page 427 and 428:
C Tornado Tools Reference EXAMPLE -
Page 429 and 430:
Page 431 and 432:
C Tornado Tools Reference period( )
Page 433 and 434:
Page 435 and 436:
C Tornado Tools Reference If task i
Page 437 and 438:
Page 439 and 440:
C Tornado Tools Reference EXAMPLE -
Page 441 and 442:
Page 443 and 444:
C Tornado Tools Reference taskCreat
Page 445 and 446:
C Tornado Tools Reference taskRegsS
Page 447 and 448:
Page 449 and 450:
C Tornado Tools Reference ti( ) NAM
Page 451 and 452:
C Tornado Tools Reference WARNING:
Page 453 and 454:
C Tornado Tools Reference SEE ALSO
Page 455 and 456:
C Tornado Tools Reference Target-se
Page 457 and 458:
C Tornado Tools Reference -use_port
Page 459 and 460:
C Tornado Tools Reference Blocks ar
Page 461 and 462:
C Tornado Tools Reference OPTIONS -
Page 463 and 464:
D Utilities Reference aoutToBin - e
Page 465 and 466:
D Utilities Reference aoutToBin NAM
Page 467 and 468:
D Utilities Reference DESCRIPTION T
Page 469 and 470:
D Utilities Reference stopping ULIP
Page 471 and 472:
D Utilities Reference elfXsyms NAME
Page 473 and 474:
D Utilities Reference hexDec NAME S
Page 475 and 476:
D Utilities Reference Chapter / Thi
Page 477 and 478:
D Utilities Reference EXAMPLE SEE A
Page 479 and 480:
D Utilities Reference OPTIONS basic
Page 481 and 482:
D Utilities Reference USAGE EXAMPLE
Page 483 and 484:
D Utilities Reference nm68k hello.o
Page 485 and 486:
D Utilities Reference SEE ALSO sect
Page 487 and 488:
D Utilities Reference [6] Between \
Page 489 and 490:
D Utilities Reference romsize NAME
Page 491 and 492:
D Utilities Reference RAM_HIGH_ADRS
Page 493 and 494:
D Utilities Reference xsym NAME SYN
Page 495 and 496:
D Utilities Reference xsymHppa NAME
Page 497 and 498:
E X Resources E.1 Predefined X Reso
Page 499 and 500:
Index Symbols ? (C/Tcl interpreter
Page 501 and 502:
Index assembler options, specifying
Page 503 and 504:
Index download options 260 download
Page 505 and 506:
Index creating 100 linking 103 open
Page 507 and 508:
Index info command (CrossWind) 258
Page 509 and 510:
Index O Object Modules folder 102 O
Page 511 and 512:
Index redirecting I/O 186-190 shCon
Page 513 and 514:
Index unreserved 82 virtual console
Page 515:
Index creating 77 virtual I/O 12 VM
show all

Tornado

Create successful ePaper yourself

Delete template?

Save as template?