You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TM</strong>/<strong>TM</strong>C/RM/RMC-<strong>2030GE</strong><br />
5 GigE Series Camera Serial Commands<br />
You can control the GigE series cameras by serial command either using RS-232 or Camera Link. The<br />
Start character is always “:” and the End character is always (return). For example, to set Asynchronous<br />
Pulse Width Mode, send the command :ASH=9 to the camera. Table 4 lists serial commands<br />
that can be used to control the camera.<br />
Table 4. <strong>TM</strong>/<strong>TM</strong>C-<strong>2030GE</strong> Command List<br />
Command Parameter End of Cmd Ack. Response Description<br />
Scan Mode<br />
Shutter Mode and Shutter Speed<br />
:MSH= X :o Set Continuous Mode Preset Shutter<br />
( X= 0)<br />
:DSH= XXX :o Set Continuous Mode Programmable<br />
Shutter ( XXX=000 - total lines)<br />
:ASH= X :o Set Async Mode Preset Shutter (X=0,<br />
9, A, B) ( X=0 async no shutter)<br />
( X=9 PWC, X=A Fixed exposure PIV,<br />
X=B PWC PIV)<br />
:ADS= XXX :o Set Async Mode Programmable Shutter<br />
(XXX=000 - 81F)<br />
:SHR? :o[shtr] Inquire current shutter mode<br />
Gain and Offset<br />
:MGA= XXX :o Set Master Gain<br />
(XXX = 000 - FFF)<br />
:MGB= XXX :o Set R channel Fine Gain<br />
(XXX = 000 - FFF)<br />
:VRA= XXX :o Set Master Offset<br />
(XXX = 000 - FFF)<br />
:VRB= XXX :o Set R channel Fine Offset<br />
(XXX = 000 - FFF)<br />
:MGA? :oMG[XXX] Inquire Master Gain<br />
(XXX = 000 - FFF)<br />
:MGB? :oSG[XXX] Inquire R channel Fine Gain (XXX =<br />
000 - FFF)<br />
:VRA? :oMF[XXX] Inquire Master Offset<br />
(XXX = 000 - FFF)<br />
:VRB? :oSF[XXX] Inquire R channel Fine Offset<br />
(XXX = 000 - FFF)<br />
Lookup Table<br />
:LINR :o Set linear table<br />
:GM45 :o Set gamma .45 table<br />
:KNEE= X1Y1X2Y2 :o Set knees<br />
(X1, Y1, X2, Y2 = 00 - FF)<br />
GigE Series Camera Serial Commands<br />
- 25 -
Change language