Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Backing Module <strong>BK</strong>-<strong>7m</strong><br />
Menu options<br />
Parameter Setting Explanation<br />
Tx Off, On Switches the transmission<br />
of MIDI messages<br />
on the Basic channel<br />
on or off.<br />
Tx Channel 1~16 The channel used to<br />
transmit MIDI messages.<br />
Performance<br />
PC Tx<br />
Off, On<br />
This parameter is used<br />
to enable or disable the<br />
transmission of program<br />
change and bank<br />
select messages related<br />
to Performance selection<br />
Style<br />
The following parameters are located on the display<br />
page that can be selected using [MENU] button‰<br />
“MIDI” ‰ “Edit System” ‰ “Style”.<br />
Parameter Setting Explanation<br />
Style Volume<br />
Rx<br />
Off, On<br />
Allows you to enable<br />
or disable the reception<br />
of volume messages<br />
relating the<br />
Style.<br />
Style Pc Rx Off, On This parameter allows<br />
you to enable or disable<br />
the reception of<br />
program change and<br />
bank select messages<br />
for Style selection.<br />
Tx Off, On Switches the transmission<br />
of MIDI messages<br />
on the Style channel<br />
on or off.<br />
Tx Channel 1~16 The channel used to<br />
transmit MIDI messages.<br />
NTA<br />
The following parameters are located on the display<br />
page that can be selected using [MENU] button‰<br />
“MIDI” ‰ “Edit System” ‰ “NTA”.<br />
r<br />
70<br />
The Style channel is used for receiving program<br />
change and bank select messages that select Styles<br />
and volume messages that change the Style’s volume.<br />
The MIDI address of a Music Style consists of three<br />
elements: a CC00 number, a CC32 number and a program<br />
change number. The values assigned to CC00<br />
and CC32 define the Style (see “Music Style list” on<br />
p. 88), whereas the program change number defines<br />
the Division (Intro, Ending, etc.). See “Style division<br />
program change numbers” on p. 90.<br />
Sending only a program change number selects<br />
another Division of the currently active Style. Be<br />
aware, however, that only sending CC00 and CC32<br />
messages (without a program change) has no effect.<br />
NOTE<br />
When you select another Style on your <strong>BK</strong>-<strong>7m</strong>, it transmits<br />
a CC00-CC32-PC cluster on the Style channel, which you<br />
could record using an external sequencer.<br />
Parameter Setting Explanation<br />
Rx Off, On Switches the reception<br />
of MIDI messages<br />
on the Style channel<br />
on or off.<br />
Rx Channel 1~16 Use this parameter to<br />
assign a MIDI receive<br />
channel to the Style<br />
section.<br />
These parameters allow you to specify on which MIDI<br />
channels the <strong>BK</strong>-<strong>7m</strong> should receive chord information<br />
used to change the Music Style’s key in real-time<br />
(the notes in question are called “Note-to-Arranger”,<br />
or “NTA” for short).<br />
Parameter Setting Explanation<br />
Channel Ch1~Ch16 MIDI channel<br />
Rx Off, On This parameters allows<br />
you to specify whether<br />
(“On”) or not (“Off”) the<br />
selected MIDI channel<br />
should be used to<br />
receive chord information.<br />
Rx Octave –4~0~ 4 Use this parameter to<br />
transpose the notes<br />
received on the<br />
selected MIDI channel<br />
(“Ch”) in steps of one<br />
octave.