CHAMP Interconnection System

More documents

Recommendations

Info

CHAMP Interconnection System Shielded CHAMP Panel Mount Connector Hardware Screwlock Hardware Components (Order separately) (Only fastening hardware supplied, other items shown for reference purposes) Material and Finish Strain Relief — Thermoplastic (black) Nut and Washers — Zinc plated carbon steel Screw Lock — Zinc plate with yellow chromate over carbon steel Metric Screw Lock — Black oxide coated carbon steel Snap-on Strain Relief Part Number 1-552298-1 (2 required) Nut Part Number 21068-4* (2 required) Washer Part Number 21074-2* (2 required) Flat Washer Part Number 21108-4 (2 required) Connector and Shield not included Screw Lock Hardware Standoff Mounting Stud Part Number 229995-1 (2 required) Snap-on Strain Relief Part Number 1-552298-1 (2 required) Recommended Panel Cutout for Front and Rear Panel Mounting Connector and Shield not included Standard Hardware Application Metric Hardware per IEEE-488 Application Note: .126 ± .003 [3.2 ± 0.08] for front panel mount and .149 ± .003 [3.78 ± 0.08] for rear panel mount. Metric Screw Lock Hardware For Front Panel Mount Metric Screw Lock Hardware Kit Part Number 553636-2 For Rear Panel Mount Metric Screw Lock Hardware Kit Part Number 553636-3 *Commercial item Standard Hardware Metric Hardware No. of Front Rear Front or Rear Positions Panel Mount Panel Mount Panel Mount A B A B A B 24 1.488 37.80 1.842 46.79 1.575 40.01 2.036 51.71 1.575 40.01 2.036 51.71 Panel Thickness Range: .125 [3.18] max. for front panel mount; .062 [1.57] max. for standard rear panel mount, .062-.093 [1.57-2.36] for metric rear panel mount. Note: For application tooling, see pages 128 thru 132. 102 Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
CHAMP Interconnection System CHAMP Latch Low Profile Connectors Product Facts ■ Ready to use connectors— strain relief covers preassembled to connector bodies ■ Overall assembled dimension of .820 [20.83] ■ Simple one-step termination operation ■ May be used in “dead-end’’ or “daisy-chain’’ applications ■ Hardware kits available for Cable-to-Cable or Cable-to- Panel applications ■ Available in 24, 36 and 50 positions ■ Capable of mass termination without time consuming soldering and prestripping of wire ■ Terminates .050 [1.27] centerline 26 AWG [0.40 mm] (solid); 28 AWG [0.08- 0.09 mm2] (stranded); 28 AWG [0.32 mm] (solid) or 30 AWG [0.25 mm] (solid) copper ribbon cable, including certain twisted pair types from .032-.045 [0.81-1.14] thick ■ Available in standard connectors, preassembled and loose-piece shielded The CHAMP Latch Low- Profile Connector comes ready to use—just slide the cable in and squeeze. The underside of the strain relief cover is fluted to assist in proper cable orientation. Plastic “barbs’’ sticking up from the connector body act as guides for proper cable alignment during insertion. When terminated, these “barbs’’ pierce the cable insulation between the conductors and lock on to the strain relief cover. Another advantage to this connector is its overall assembled dimension (.820 [20.83]), which takes up less space inside or outside of the equipment. Standard connectors are available in 14-, 24-, 36- and 50-position plugs or receptacles. Shielded CHAMP Latch Connector version receptacles are available loose piece and preassembled in 24, 36, and 50 positions. A 64-position plug or receptacle can be supplied with an assembled height of 1.130 [28.70]. For 64-position plug and receptacle part numbers and specifications, contact Tyco Electronics at the numbers listed below. CHAMP Latch Connectors provide a fast, reliable means of mass terminating .050 [1.27] centerline ribbon cable without timeconsuming soldering and prestripping of wire. They are capable of terminating 26 AWG [0.40 mm] (solid); 28 AWG [0.08-0.09 mm2] (stranded) 28 AWG [0.32 mm] (solid) or 30 AWG [0.25 mm] (solid) copper ribbon cable. Termination of CHAMP Latch Low Profile Connectors is accomplished in a simple onestep operation using the appropriate CHAMP Latch tooling. See page 132. The ability to make “daisy chain’’ terminations requires nothing more than depressing the stop bar on the hand tool or repositioning the stop bar provided on the base plate for the manual applicator. The housings and covers are constructed of black thermoplastic. The terminals are gold over nickel plated high strength copper alloy on the mating face and gold flash over nickel plate on the terminating side. The mating face consists of 2 rows of terminals on .085 [2.16] centers. Terminating side consists of terminals on .100 [2.54] centers for an effective .050 [1.27] staggered termination. EMI Shield, for Shielded Connectors, are die cast zinc with nickel plating. Connector hardware kits are available for Cable-to-Cable (Screw Lock, Bail Lock and CHAMP-LOK connectors) applications, and Cable-to- Panel (Screw Lock, Bail Lock, Metric Screw Lock for IEEE-488 Applications and CHAMP-LOK connector) applications. Note: CHAMP Latch connectors have been tested on a wide variety of .050 [1.27] centerline cables conforming to Tyco Electronics drawings 746395, 746396 and 86901. If cables other than those specified are used, forward sample of cable for approval to Tyco Electronics at the address listed at the back of this catalog. Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967 103 CHAMP .085 Centerline Miniature Ribbon Connector Systems 3
Page 1 and 2:
CHAMP Interconnection System
Page 3 and 4:
CHAMP Interconnection System Table
Page 5 and 6:
CHAMP Interconnection System Table
Page 7 and 8:
Product Facts ■ EMI shielded high
Page 9 and 10:
Hybrid Receptacle, Low Profile, Shi
Page 11 and 12:
Standard Plugs CHAMP Interconnectio
Page 13 and 14:
Standard With Squeeze-to-Release La
Page 15 and 16:
Screwlock, Boardmount Part Number 7
Page 17 and 18:
CHAMP Interconnection System CHAMP
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Product Facts ■ Contacts on .050
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Product Facts ■ Capable of carryi
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52: CHAMP Interconnection System CHAMP
Page 71 and 72: CHAMP Interconnection System Recomm
Page 81 and 82: CHAMP Interconnection System Shield
Page 101: CHAMP Interconnection System Shield
Page 111 and 112: } CHAMP Interconnection System Mate
Page 113 and 114: CHAMP Interconnection System Plugs
Page 119 and 120: CHAMP Interconnection System 24-Pos
Page 129 and 130: CHAMP Interconnection System Produc
Page 131 and 132: CHAMP Interconnection System CHAMPO
Page 135 and 136: CHAMP Interconnection System RoHS C
Page 137 and 138: CHAMP Interconnection System RoHS C
Page 139 and 140: CHAMP Interconnection System Non-Ro
Page 141 and 142: CHAMP Interconnection System Non-Ro
Page 143 and 144: CHAMP Interconnection System Part N
Page 145 and 146: CHAMP Interconnection System Engine
Page 147 and 148: Global Contacts Americas Argentina
show all

CHAMP Interconnection System

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?