CHAMP Interconnection System

CHAMP Interconnection System
CHAMP IDC Connectors for Special Applications,
Interface Bus IDC Connector Panel Mount Applications
Panel Mount Receptacle
(24-Position)
Snap-On Strain Relief, 24-Position
(2 parts required per each assembly)
Material and Finish
Housing — Black thermoplastic
Contacts — Selectively plated gold over nickel plated on high strength copper alloy
Material and Finish
Black thermoplastic
Note: For tooling, see pages 128 thru 132.
Low Profile
Part Number 1-552298-1
Panel Mount Metric Screw Lock
Hardware Kits
(one kit required per each assembly)
Wire Size
Housing Contact Part
Solid 7-Strand Color Dot Letter Number
AWG mm AWG mm2 Designation Designation (thin flange)
22 0.64 22 0.40 Green C 2-552322-1
24-26 0.51- 0.40
24 0.20 Blue B 2-552273-1
— — 26-27-28
0.14-
0.10-0.09
Yellow E 2-552474-1
Material and Finish
Nut and Lock Washer — Zinc plated carbon steel
Metric Mounting Screw — Black oxide plated carbon steel
Panel Cutout Dimensions
For Front Panel Mount
Part Number 552633-3
For Rear Panel Mount
Part Number 552633-4
Description
Dimensions
A B C
Front Panel
1.488
37.80
2.036
51.71
.126
3.20
Rear Panel
1.575
40.01
2.036
51.71
.192
4.88
Note: Panel Thickness Range .062-.125 [1.57-3.18] for
front panel mount applications.
Panel Thickness Range .062-.093 [1.57-2.36] for
rear panel mount applications.
122
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967