CHAMP Interconnection System

CHAMP Interconnection System
Shielded CHAMP Cable Connectors
Product Facts
■ Designed for shielding, NOT
just as metal shell
connector
■ Available in 24-, 36- and
50-position plugs and
receptacles
■ Available in bail and screw
lock plug and thru-hole
receptacle styles with
pre-loaded insulation
displacement contacts in a
choice of two wire slot sizes
■ Capable of using any
standard CHAMP connector
applicator tooling
■ Unique, high tensile strain
relief with adjustable
ratchet
■ Conducive to post molding
simply by deleting 180°
cover kit
■ No outer crimp ferrule
required
■ Fully compatible with all die
cast, metal shell panel
mount CHAMP connectors in
a variety of termination
styles, and intermateable
with all those of a similar
design
CHAMP .085 Centerline
Miniature Ribbon Connector Systems
3
The CHAMP Connector
product line continues to
expand, fulfilling the needs
of the various industries.
The Shielded CHAMP Cable
Connectors have been
specifically designed to
produce the optimum in
shielding effectiveness
while still offering low initial
cost and ease of assembly
with the applied-costsavings
of a proven insulation
displacement system.
Shielded CHAMP Cable
Connectors are available in
24-, 36- and 50-position
plugs and receptacles with
either bail lock or screw
lock plug and thru-hole
receptacle styles.
Connectors are shipped
with contacts preloaded
and are ready for termination
in all standard CHAMP
Connector applicator tooling.
Two different contact
sizes are available—B-slot,
24 AWG [0.51 mm] and 26
AWG [0.04 mm] (solid) or
24 AWG [0.20 mm2]
(7-strand); and E-slot,
26-27-28 AWG
[0.14-0.10-0.09 mm2]
(7-strand) wire.
Superior shielding performance
is achieved due to
minimal leakage from a specially
designed two-piece,
precision formed shield.
Positive contact with the
panel mounted connector is
obtained by the interface of
metal “spring fingers” which
protrude through small
openings around the
perimeter of the plug and
contact plate on receptacle.
Highly effective braid termination
is achieved with an
outstanding stored energy
design incorporated into the
two-piece shield.
In addition to the superior
shielding effectiveness,
another important feature of
the connector is the design
of the outer plastic strain
relief cover, which uses a
ratcheting wedge that provides
greater strain relief as
more tension is applied to
the cable. Should post
molding be desired, the
180° cover kit may be
deleted.
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
97