CHAMP Interconnection System

CHAMP Interconnection System
CHAMP PCB Connectors, ACTION PIN Connectors
Product Facts
■ Capable of being used with
single- or double-sided
printed circuit boards
■ Eliminates the need to hand
solder, except for Edge
Mount Connectors
■ Connectors fully intermateable
with others of
similar design
■ UL 94V-O self-extinguishing
thermoplastic housings and
accessories
■ Capable of accommodating
printed circuit board thicknesses
of .062 [1.57], .093
[2.36] or .125 [3.18]
■ Diversified applications
throughout the following
markets — medical
equipment, data control
systems, telephone
interconnect systems and
electronic instrumentation
(commercial and industrial)
■ Operating temperature
range of -40°C to +105°C
ACTION PIN connectors
for printed circuit board
applications combine the
high reliability of the
CHAMP Insulation
Displacement connector
interface with the utilization
and cost savings of
ACTION PIN terminals.
They are available in both
plug and receptacles in 14-,
24-, 36-, 50- and 64-position
sizes.
The connectors are
supplied preloaded with
contacts and a plastic
cover which serves as the
bearing surface to press the
connector into the board.
Rapid assembly is made
possible by use of a simple
arbor tool. The plastic cover
also serves as a dust cover
which may be left in place
until ready to use.
The connectors may be
mounted on PC boards with
a thickness of .062 [1.57]
to .125 [3.18]. They are
designed for interface with
standard CHAMP IDC
cable-to-panel plugs or
receptacles and are
available for use with screw
lock, bail lock or unique
CHAMP-LOK connector
locking clip hardware.
The design of the
ACTION PIN terminal
permits insertion into
printed circuit boards
having either plated-thru or
unplated holes. In platedthru
holes, completely
reliable termination may be
accomplished either by
press fit of the pins or by
both press fitting and
subsequent conventional
soldering. In unplated
holes, the pins must be
soldered in place.
For the connectors with selfretained
contacts, hardware
to secure connector to the
PC board may not be
required if unmating force of
mating connectors does not
exceed 1 lb. [4.45 N] per
terminal (50 lbs. [222.4 N]
for 50 positions.)
76
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967