CHAMP Interconnection System

CHAMP Interconnection System
CHAMP .050 Centerline Connectors (Series I, VESA, Docking, SCSI,
Blindmate, SCAII, Free Height, Series II, Series III)
CHAMP .050 Series Connectors
meet the needs for
high density .050 inch
[1.27mm] contact centerlines
required by constantly
emerging miniaturized
designs. These connectors
allow the printed circuit
board designer to maximize
valuable PC board real
estate without sacrificing
interconnection capability.
The trapezoidal, D-shaped
mating face is a familiar
industry standard, along
with the ribbon, or leaf, contact
design that is durable
enough to withstand the
rigors of repeated mating.
Whether the application
need is for board-to-board,
or wire-to-board interconnections,
the CHAMP .050
Series connector family provides
a solution.
Board-to-Board Connectors
The Series I is an all-plastic
connector system used for
internal board-to-board
interconnections. The Right
Angle and Vertical connectors
are available in both
plug and receptacle genders,
which permits parallel,
perpendicular, and in-line
interconnection geometries.
Receptacle connectors
also serve as card edge
connectors. Position sizes
available range from 20 to
200 positions.
Series I connectors use a
single spring fixed plug and
compliant receptacle contact
combination that is tolerant
of variations in mating
depth. This tolerance allows
the connectors to accommodate
printed circuit
board warpage.
In addition to the high density
and unique contact
design, Series I connector’s
options include a high temperature
LCP plastic housing
material, polarization to
PC board.
Both connector configurations
can provide parallel,
perpendicular, and in-line
interconnections.
CHAMP .050 Series I
Docking Connector is
designed for use on new
notebook type PCs. This
product group has been
developed to provide an
improved ESD (Electrostatic
Discharge) protection by
means of shielding. Two
versions are available,
board-to-board connector
and board-mount connector
to mate with wiremount plug
connectors.
CHAMP .050 Series I,
Blindmate Single
Connector Attachment
(SCA 2) is an 80-position
configuration with integral
blindmating capabilities.
It is capable of carrying
required SCSI data, control,
power and auxiliary signals.
Interconnections are simplified
by the SCA 2 connector’s
diverse architecture
design that will support the
requirements for narrow
and wide SCSI operations.
CHAMP .050 Centerline
Connector Systems
2
High Density Interconnection System
CHAMP .050 Series Connector Family
Board-to-Board
Cable-to-Board
.025 C L
Ribbon Cable
Receptacle
Fixed
Stack HT
Variable
Stack HT
Series II
Series III
Two Row
Two Row
FH
Std Temp
High Temp
Standard
Series I
Blindmate/
SCA-2
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
17