CHAMP Interconnection System
CHAMP Interconnection System
CHAMP Interconnection System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CHAMP</strong> <strong>Interconnection</strong> <strong>System</strong><br />
<strong>CHAMP</strong> .085 Centerline Connectors Application Tooling (Continued)<br />
<strong>CHAMP</strong> Latch Hand Tool<br />
Part Number 231561-1<br />
IS 408-3135<br />
<strong>CHAMP</strong> Latch Applicator (only)<br />
Part Number 231576-1<br />
IS 408-3134<br />
Shown installed in<br />
Manual Arbor Tool<br />
Part Number 91085-2<br />
IS-408-7777<br />
This tool is capable of terminating<br />
ribbon cable with<br />
26 AWG [0.46 mm] (solid);<br />
28 AWG [0.32 mm] (solid)<br />
and 28 AWG [0.08-0.09<br />
mm2] (stranded) or 30<br />
AWG [0.25 mm] (solid)<br />
conductors to 24-, 36- and<br />
50-position low profile<br />
connectors.<br />
If using other AMP-LATCH<br />
Ribbon Cable Connectors,<br />
use Hand Tool Kit Part<br />
Number 768340-1 (IS 408-<br />
9828) and Locator Kit Part<br />
Number 768351-1 (IS 408-<br />
9839). Tool Kit includes<br />
bench mount for increased<br />
productivity. This provides<br />
the most versatile and economical<br />
tooling.<br />
This tooling is capable of<br />
terminating the same solid<br />
or stranded conductors as<br />
the hand tool. The tooling is<br />
a two-piece kit that includes<br />
a locator and a cable stop<br />
insert.<br />
The locator features a connector<br />
track to support the<br />
connector, a connector stop<br />
to position the connector<br />
and a cable guide to align<br />
the cable with the connector.<br />
The reversible cable stop<br />
insert accommodates<br />
dead-end (flush) or daisychain<br />
(feed-thru) terminations<br />
with .200 [5.08]<br />
minimum spacing between<br />
connectors.<br />
If using other AMP-LATCH<br />
Ribbon Cable Connectors<br />
use Arbor Tool Part Number<br />
91085-2 or Pneumatic Auto-<br />
Cycle Tool, Part Number<br />
91112-3 (IS 408-6732)<br />
with base tool Part Number<br />
768338-1 (IS 408-9827),<br />
and Locator Kit, Part<br />
Number 768351-1 (IS 408-<br />
9839).<br />
For 64-Position<br />
<strong>CHAMP</strong> Latch Connectors<br />
use tooling only, Part<br />
Number 230536-1.<br />
IS 408-6504<br />
132<br />
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514<br />
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628<br />
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013<br />
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Change language