CHAMP Interconnection System

CHAMP Interconnection System
Shielded CHAMP PCB Connectors
Product Facts
■ Excellent protection from
electromagnetic interference
or electrostatic
discharge to sensitive
circuitry
■ Connectors compatible and
intermateable with all
others of similar design
■ Available in three different
panel-mount styles
■ The shielded right angle,
edge-mount and verticalmount
CHAMP connectors
for PC board application are
rear panel-mounted
■ Choice of fastening hardware—standard
screw lock,
bail lock, metric screw locks
per IEEE-488 applications
■ Connectors available in kit
form or preassembled
versions
■ Thick die-cast metal shell
offers superior shielding
over a wide frequency range
■ Shell protects equipment
from inadvertent electrostatic
discharge
■ Housings are stackable
■ Applied cost savings
■ Available in 24, 36 and 50
positions
CHAMP .085 Centerline
Miniature Ribbon Connector Systems
3
Shielded CHAMP
Connectors afford excellent
protection from electromagnetic
interference or electrostatic
discharge to
sensitive circuitry. These
connectors are completely
compatible and intermateable
with all others of a
similar design, yet they are
unique because of their
superior construction.
They are available in
three different panel-mount
styles. Each style consists
of an appropriate CHAMP
connector and a rugged
die-cast metal shell. The
shielded right angle, edge
mount and vertical mount
CHAMP connector versions
for PC board applications
must be rear panelmounted.
A choice of fastening hardware
is available in each of
the styles noted above.
They include standard
screw lock, bail lock or metric
screw lock as required
by IEEE-488.
Each connector is shipped
in bulk or individual kit form
and consists of the die cast
metal shell and appropriate
style connector. After PC
board mounting, it is easily
installed to the panel with
the appropriate hardware
kit, which is ordered separately.
The thick die-cast metal
shell offers superior shielding
over a wider frequency
range than drawn sheet
metal or plated/filled plastics.
This shell also protects
the equipment from inadvertent
electrostatic
discharge because the diecasting,
together with the
fastening hardware,
assures a reliable chassis
ground connection.
Due to its inherent rigidity,
the die-cast housing may
be stacked without distortion
or bending of connector
flanges and panel. This
advantage contributes to
the overall effectiveness of
the system.
The Shielded CHAMP right
angle PC board connector
offers a low-cost transition
to or from double-sided circuitry,
the Shielded CHAMP
edge-mount and verticalmount
connectors also
allow accessibility to both
sides of double-sided
boards. All three of these
styles are available in 24-,
36- and 50-position sizes.
A 50-position Shielded
ACTION PIN receptacle is
also available. See page 78
for part numbers and
dimensions.
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
81