CHAMP Interconnection System
CHAMP Interconnection System
CHAMP Interconnection System
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CHAMP</strong> <strong>Interconnection</strong> <strong>System</strong><br />
<strong>CHAMP</strong> .050 Centerline Connectors (Series I, VESA, Docking, SCSI,<br />
Blindmate, SCAII, Free Height, Series II, Series III) (Continued)<br />
The 40-position <strong>CHAMP</strong><br />
.050 Series I, Blindmate<br />
Single Connector attachment<br />
(SCA 2) answers the<br />
industry’s need for one connector<br />
that is suitable for<br />
the direct attachment of<br />
Fibre Channel disk drives to<br />
backplanes and motherboards.<br />
The <strong>CHAMP</strong> .050 Series,<br />
SCA 2 connector in a 40-<br />
position configuration has<br />
been designed for serial<br />
transfer Fibre Channel<br />
devices, and carries all<br />
signals as required by the<br />
Fibre Channel Physical<br />
Interface and the Fibre<br />
Channel Arbitrated Loop<br />
Standards. In addition, all<br />
required power and auxiliary<br />
signals are carried by<br />
the same single attachment<br />
connector.<br />
Designed and manufactured<br />
with the Disk Drive<br />
Industry’s quality requirements<br />
as the driving motivation,<br />
the 40-position SCA<br />
2 connector features the<br />
industry accepted polarized<br />
“D” connector interface.<br />
Features include housings<br />
made of UL 94V-0 rated IR<br />
reflow process compatible<br />
high temperature material,<br />
gold-over-nickel plated<br />
ribbon style contacts,<br />
Advanced Ground Contacts<br />
(AGC) with integral metal<br />
hold-down, and complete<br />
power sequencing capabilities.<br />
In addition to these<br />
features, the <strong>CHAMP</strong> Series<br />
I, Blindmate SCA 2 connector<br />
is fully compatible with<br />
existing <strong>CHAMP</strong> .050 Series<br />
I connectors.<br />
Blindmate SCA 2 connectors<br />
are the interface for 3.5<br />
Fibre Channel disk drives<br />
and will permit direct drive<br />
attachment to backplane<br />
arrays, which can eliminate<br />
costly cable assemblies<br />
and adapter boards while<br />
improving system reliability.<br />
The <strong>CHAMP</strong> .050 Series,<br />
SCA 2 Connector in a 20-<br />
position configuration has<br />
been designated the interface<br />
for the Gigabit<br />
Interface Converter specification.<br />
A straddle-mount<br />
plug is used on the GBIC,<br />
a vertical receptacle is<br />
available for direct attachment<br />
to a backplane and a<br />
right angle receptacle is<br />
available for adapter card<br />
applications.<br />
For additional information<br />
on this new technology,<br />
contact Tyco Electronics.<br />
The FH, or Free Height,<br />
connectors are also an allplastic<br />
connector system<br />
for internal board-to-board<br />
interconnections with a single<br />
spring leaf contact<br />
design. These connectors<br />
may be considered as an<br />
alternative to the Series I<br />
product line, with the added<br />
feature of variable stacking<br />
heights. The vertical receptacle<br />
is available in various<br />
housing profiles to permit<br />
board stacking heights from<br />
.315 inch [8.0mm] to .709<br />
inch [18.0mm] in .040 inch<br />
[1.0mm] increments.<br />
Position sizes available<br />
range from 40 to 180 positions<br />
in both plug and<br />
receptacle for right angle<br />
and vertical configurations.<br />
A feature unique to the FH<br />
system is the closed bottom<br />
in the housing, which further<br />
inhibits contact contamination<br />
from flux and<br />
solder during processing.<br />
Wire-to-Board Connectors<br />
The Series II is a shielded<br />
I/O connector system for<br />
wire-to-board connections<br />
offering maximum EMI protection.<br />
The series includes<br />
right angle and vertical<br />
printed circuit board receptacles<br />
and cable plug connectors.<br />
The right angle<br />
board connectors are available<br />
with retention board<br />
locks and a stamped metal<br />
shield. The vertical connectors<br />
incorporate a die cast<br />
metal shield. Selected sizes<br />
are available in high temperature<br />
housing material.<br />
The cable plug connectors<br />
use insulation displacement<br />
contacts for fast, accurate<br />
termination of 28 AWG<br />
[0.008 mm2] stranded, discrete<br />
wire, jacketed cable.<br />
The cable plug offers a<br />
stamped metal backshell<br />
with a 180° exit for ESD<br />
(Electrostatic Discharge)<br />
protection. A plastic enclosure<br />
fits over the backshell<br />
to provide an aesthetically<br />
pleasing appearance. A<br />
“squeeze-to-release latch”<br />
captivation mechanism is<br />
used on the cable plug.<br />
A wide range of position<br />
offerings of 14 to 100 are<br />
available.<br />
General Product Facts<br />
■ High density .050 [1.27]<br />
contact centerlines<br />
■ Leaf contacts accommodate<br />
minor mating misalignment<br />
■ D-shaped polarized mating<br />
face<br />
■ Variety of application tooling<br />
available to meet a wide<br />
range of production volumes<br />
18<br />
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514<br />
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628<br />
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013<br />
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Change language