CHAMP Interconnection System
CHAMP Interconnection System
CHAMP Interconnection System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CHAMP</strong> <strong>Interconnection</strong> <strong>System</strong><br />
<strong>CHAMP</strong> Printed Circuit Board (PCB) Connectors<br />
Product Facts<br />
■ Capable of being used with<br />
single- or double-sided<br />
printed circuit boards<br />
■ Eliminates the need to hand<br />
solder, except for Edge<br />
Mount Connectors<br />
■ Connectors fully intermateable<br />
with others of<br />
similar design<br />
■ UL 94V-O self-extinguishing<br />
thermoplastic housings and<br />
accessories<br />
■ Connectors available in 14,<br />
24, 36, 50 and 64 positions<br />
with a choice of mounting<br />
methods: screw, bail mount,<br />
or locking latch types<br />
■ Capable of accommodating<br />
printed circuit board thicknesses<br />
of .062 [1.57], .093<br />
[2.36] or .125 [3.18]<br />
■ Diversified applications<br />
throughout the following<br />
markets — medical<br />
equipment, data control<br />
systems, telephone<br />
interconnect systems and<br />
electronic instrumentation<br />
(commercial and industrial)<br />
■ Operating temperature<br />
range of -40°C to +105°C<br />
<strong>CHAMP</strong> Printed Circuit<br />
Board Connectors are fully<br />
intermateable with existing<br />
connectors of a similar<br />
design. They are capable of<br />
accommodating printed circuit<br />
board thicknesses from<br />
.062-.125 [1.57-3.18].<br />
Applications for this type of<br />
connector are widely diversified<br />
and are used in the<br />
following markets:<br />
■ Medical Equipment<br />
■ Data Control <strong>System</strong>s<br />
■ Telephone Interconnect<br />
<strong>System</strong>s<br />
■ Electronic Instrumentation<br />
(Commercial and<br />
Industrial)<br />
The connector is designed<br />
for high density wave solderable<br />
applications, eliminating<br />
the need for hand<br />
soldering, except for Edge<br />
Mount Connectors and can<br />
be applied to either singleor<br />
double-sided boards.<br />
The surface mounting area<br />
is minimal and allows full<br />
usage of available printed<br />
circuit land area.<br />
These connectors are available<br />
in 14, 24, 36, 50 and<br />
64 positions with a choice of<br />
mounting methods for your<br />
specific needs, i.e. screw,<br />
bail mount or locking latch<br />
types. Board mounting for<br />
Right Angle Connectors is<br />
accomplished by nut and<br />
bolt, pop riveting or an<br />
optional self-tapping screw<br />
arrangement. Edge and<br />
Vertical Mount Connectors<br />
are board mounted by a<br />
wide choice of hardware<br />
applicable to your specific<br />
applications.<br />
The connector requires minimum<br />
hardware and installation<br />
time and is<br />
compatible with conventional<br />
printed circuit mass<br />
production soldering<br />
processes, thereby providing<br />
cost savings.<br />
For additional information<br />
concerning the <strong>CHAMP</strong><br />
Printed Circuit Board<br />
Connectors, contact your<br />
Tyco Electronics Sales<br />
Engineer or contact<br />
Tyco Electronics at the<br />
numbers listed below.<br />
<strong>CHAMP</strong> .085 Centerline<br />
Miniature Ribbon Connector <strong>System</strong>s<br />
3<br />
Catalog 1-1773441-4 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514<br />
Issued 10-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628<br />
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013<br />
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967<br />
69
Change language