EFM User Manual - CTC Union Technologies Co.,Ltd.

4.4.5 RATE
Move the cursor " >> " to Rate and press enter.
-----------------------------------------------------------------------------
>> port Modify port rate
list
Show Rate Control configuration
-----------------------------------------------------------------------------
Select which port you want to modify and then set up the data rate.
-----------------------------------------------------------------------------
Command: setup rate port
Message: Please input the following information.
Port index : 1
rate (TAB Select) :
-----------------------------------------------------------------------------
Setup data rate per port:
Port 1 LAN1 □No limit □128K □256K □512K □1M □2M
Port 2 LAN2 □No limit □128K □256K □512K □1M □2M
Port 3 LAN3 □No limit □128K □256K □512K □1M □2M
Port 4 LAN4 □No limit □128K □256K □512K □1M □2M
Port 5 DSL □No limit □128K □256K □512K □1M □2M
Port 6 Sniffing □No limit □128K □256K □512K □1M □2M
4.4.6 MGMT
Move the cursor " >> " to mgmt and press enter.
MGMT interface parameters can be configured MGMT IP address and subnet mask.
----------------------------------------------------------------------
Command: setup mgmt
Message: Please input the following information.
Interface number :
----------------------------------------------------------------------
The EFM modem only has one MGMT interface can use, so that use the default interface
number is 1. The default IP address and subnet mask are 196.168.1.1 and 255.255.255.0 .
>> address MGMT IP address and subnet mask
85