Phoenix Contact INTERFACE System Cabling and ... - Power/mation

INTERFACE Cabling
VARIOFACE wiring interface
VARIOFACE modules for pluggable
miniature relays and/or
miniature solid-state relays
The 4, 8, and 16-way relay and solid-state
relay interfaces UMK-... RM provide four,
eight or 16 slots for commercially available
electromechanical relays (REL-MR...) or
optoelectronic relays.(SIM-EI...). The
connections between the I/O module and
the electronics, as well as the process
cabling, are implemented via screw
connection terminal blocks.
Notes:
For the protection of relay coils and contacts, inductive loads must
be dampened with an efficient protection circuit.
Other input voltages on request.
1) not with 230 V AC.
2) with 230 V AC glow lamp.
3) with 100 V DC and 230 V AC glow lamp.
H W
D
UMK-4 RM 24
For 4 pluggable miniature relays
or miniature solid-state relays
0 2 3 4 N N
P
H W
D
UMK-4 RM...
For 4 pluggable miniature relays
or miniature solid-state relays
1 2 3 4 + + - -
P
1 2 3 4
1 2 3 4
12 11 14 22 21 24 32 31 34 42 41 44
0 + A 0 + A 0 + A 0 + A
12 11 14 22 21 24 32 31 34 42 41 44
0 + A 0 + A 0 + A 0 + A
Description Input voltage Type Order No.
Pcs. /
Pkt.
Type
Order No.
Pcs. /
Pkt.
VARIOFACE module, for four pluggable miniature relays or
miniature solid-state relays, with light indicator (without relays)
24 V AC/DC UMK- 4 RM 24 2971344 1
VARIOFACE module, for pluggable miniature relays or miniature
solid-state relays, with light indicator (without relay)
5 V DC UMK- 4 RM 5DC 2972819 1
12 V DC UMK- 4 RM 12DC 2972822 1
24 V DC UMK- 4 RM 24DC 2972835 1
48 V DC UMK- 4 RM 60DC 2972851 1
110 V DC UMK- 4 RM110DC 2972864 1
230 V AC UMK- 4 RM230AC 2972880 1
Technical data
Coil side
Tolerance of the input voltage ±10% ±10%
Input circuit Bridge rectifier Free-wheeling diode, polarity protection
Operating voltage display - LED yellow 1 )
Status display/channel LED yellow LED yellow 2 )
Type of connection Screw connection Screw connection
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 24
Contact side
Contact type 1 PDT 1 PDT
Max. switching voltage 250 V AC/DC 250 V AC/DC
Limiting continuous current 6 A 5 A (optocoupler dependent)
Type of connection Screw connection Screw connection
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
General data
Test voltage 2.5 kV (50 Hz, 1 min) 2.5 kV (50 Hz, 1 min)
Ambient temperature range -20°C ... 50°C -20°C ... 50°C
Standards/regulations DIN VDE 0110 DIN VDE 0110
Mounting position Any Any
Dimensions W / H / D 67.5 mm / 59 mm / 77 mm 67.5 mm / 59 mm / 77 mm
300 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com