Phoenix Contact INTERFACE System Cabling and ... - Power/mation

More documents

Recommendations

Info

Feed-through terminal blocks for PLC-INTERFACE INTERFACE Cabling VARIOFACE system cabling The VARIOFACE PLC-VT terminals are passive feed-through terminal blocks, with the same shape as the 6.2 mm slim relay and optocoupler interfaces PLC-INTERFACE. It is thus possible to implement 8-channel interface blocks for the system cabling, which can be adapted to a bit for the particular application. For individual requirements, the relay, optocoupler or the PLC-VT terminal blocks for passive signal transmission can be combined as needed. PLC-VT/ACT PLC-VT/ACT/LA – Can be combined with PLC-INTERFACE actuator series – Signal path with two additional potential levels for free assignment (threeconductor connection) – Optionally with LED. The system connection is made via the PLC-V8 adapter. Note: Type of housing: Polyamide PA non-reinforced, color: green. For marking systems and mounting material, see CLIPLINE catalog. Description No. of pos. H W D PLC-VT/ACT... VARIOFACE feed-through terminal blocks for PLC-INTERFACE actuator series u P F Module width W Type Order No. Pcs. / Pkt. VARIOFACE feed-through terminal block (three-wire connection), for PLC-INTERFACE actuator series 6.2 mm PLC-VT/ACT 2295567 10 VARIOFACE feed-through terminal block, same as before, however, with 24 V DC light indicator 6.2 mm PLC-VT/ACT/LA 2296867 10 Technical data PLC-VT/AKT PLC-VT/AKT/LA Max. perm. operating voltage Max. 250 V AC/DC 24 V DC Max. perm. current (per branch) 6 A (per signal conductor) 6 A (per signal conductor) Ambient temperature range -20°C ... 60°C -20°C ... 60°C Mounting position Any Any Standards/regulations DIN EN 50178, IEC 62103 Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 Dimensions H / D 94 mm / 80 mm 2 3 1 4 5 PLC-VT/ACT connection scheme 2 3 1 4 Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 info@powermation.com - 800-843-9859 - www.powermation.com PLC-VT/ACT/LA connection scheme 5 PHOENIX CONTACT 245
INTERFACE Cabling VARIOFACE system cabling COMPACT-LINE output modules with relays, one N/O contact These VARIOFACE Compact Line output modules are used in combination with the respective front adapters. Like the front adapters, the modules are connected via 14-pos. or 50-pos. system cables. The following features characterize these relay modules: – Pluggable miniature relays, each with an N/O contact – Universal applications from 1 mA to 3 A continuous current through 2-layer double contact with hard gold plating – Low construction height of only 45 mm – LED status display for each signal path and supply voltage – Free-wheeling and reverse polarity protection diode for each signal path. With the 32-channel version, the system cable is connected to the 16-channel base module UM 45-16RM/MR-G24/1/PLC. The output expansion module UM 45-16RM/MR- G24/1/E/PLC with a further 16 channels is coupled to the base module via a 20-position flat-ribbon cable (length: 10 cm). Notes: Type of housing: Terminal blocks: Polyamide PA non-reinforced, color: green. Housing: PVC For marking systems and mounting material, see CLIPLINE catalog. The connection cable between the base and the extension modules is delivered with the extension unit. H W D UM 45-8RM/MR-G24/1/PLC Output module with eight miniature relays, 1 N/O contact 1 2 3 8 91113101214 1 2 3 8 14 13 24 23 34 33 84 83 + - P Module width Description W Type Order No. Pcs. / Pkt. VARIOFACE-COMPACT-LINE output module, with eight miniature relays, plugged, for 24 V DC (including relays) 103 UM 45- 8RM/MR-G24/1/PLC 2962900 1 VARIOFACE-COMPACT-LINE output module, with 16 miniature relays, plugged, for 24 V DC (including relays) 215 VARIOFACE-COMPACT-LINE output extension module, with 16 miniature relays, plugged, for 24 V DC (including relays) 200 Plug-in miniature relay, with power contact REL-MR-G 24/1 2961037 8 Technical data Coil side Operating voltage U N 24 V DC Typ. input current at U N 6.5 mA Typ. response time at U N 5 ms Typ. release time at U N 15 ms Input circuit Free-wheeling diode, polarity protection Status display/channel LED yellow Type of connection Flat-ribbon cable plug connector in acc. with IEC 60603-13 246 PHOENIX CONTACT No. of pos. 14 Contact side Contact type 1 N/O contact (double contact) Contact material AgNi, 5 µm hard gold-plated Max. switching voltage 250 V AC / 125 V DC Min. switching voltage 5 V Max. inrush current 5 A Limiting continuous current 3 A Min. switching current 1 mA Max. interrupting rating: 24 V DC 72 W 48 V DC 60 W 60 V DC 50 W 110 V DC 50 W 250 V AC 750 VA Type of connection Screw connection Connection data solid / stranded / AWG 0.14 ... 1.5 mm² / 0.14 ... 1.5 mm² / 26 - 14 General data Test voltage 2 kV AC (50 Hz, 1 min) Ambient temperature range -20°C ... 50°C Rated operating mode 100% operating factor Mechanical life 2 x 10 7 cycles Standards/regulations IEC 60664, DIN EN 50178, IEC 62103 Mounting position Any Assembly In rows with zero spacing Dimensions H / D 50 mm / 45 mm Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108 info@powermation.com - 800-843-9859 - www.powermation.com
Page 1 and 2:
182 PHOENIX CONTACT Courtesy of Pow
Page 3 and 4:
INTERFACE Cabling VARIOFACE system
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14: INTERFACE Cabling VARIOFACE system
Page 43 and 44: H W D INTERFACE Cabling VARIOFACE s
Page 63: INTERFACE Cabling VARIOFACE system
Page 93 and 94: INTERFACE Cabling VARIOFACE wiring
Page 103 and 104: H W D INTERFACE Cabling VARIOFACE w
Page 105 and 106: H W D H W D INTERFACE Cabling VARIO
Page 107 and 108: a INTERFACE Cabling VARIOFACE wirin
Page 115 and 116:
H W D INTERFACE Cabling VARIOFACE w
Page 117 and 118:
INTERFACE Cabling VARIOFACE wiring
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
A INTERFACE Cabling VARIOFACE wirin
Page 135 and 136:
show all

Phoenix Contact INTERFACE System Cabling and ... - Power/mation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?