Phoenix Contact INTERFACE System Cabling and ... - Power/mation

INTERFACE Cabling
VARIOFACE system cabling
System cable with D-SUB sockets and
pin strip
Special lengths
Preassembled shielded round cables
for connecting VARIOFACE termination
boards. The cables are assembled with
D-SUB strips in accordance with
IEC 60807-2/DIN 41652.
The order key is defined by three
features.
The features in the appropriate
sequence are:
– Cable type
– Assembly
– Length in meters
There are three assembly variants of the
shielded round cable:
– CABLE D-SUB-S/.../.../...
D-SUB socket strip on one end and
D-SUB pin strip on the other
– CABLE D-SUB-B-B-S/.../.../... D-SUB
socket strip at both ends
– CABLE D-SUB-S-S-S/.../.../... D-SUB pin
strip at both ends
The features necessary for clear
identification of an order are described
below:
Cable type
– The number of individual conductors of
the cable is defined here.
Assembly
– (example for CABLE D-SUB-S/.../.../...)
– None,
the cable is not assembled at either ends
– 9-pos. D-SUB socket strip at one end
9-pos. D-SUB pin strip at one end
the cable connects (1:1) a 9-pos. D-SUB
socket and pin strip
– 15-pos. D-SUB socket strip at one end
15-pos. D-SUB pin strip at one end
the cable connects (1:1) a 15-pos.
D-SUB socket and pin strip; or up to
– 50-pos. D-SUB socket strip at one end
50-pos. D-SUB pin strip at one end
the cable connects (1:1) a 50-pos.
D-SUB socket and pin strip.
Sample order for round cable set assembled with pin strip on one side and socket strip on one side
– unshielded 25-position round cable set, assembled with one 25-pos. D-SUB socket strip and one 25-pos. D-SUB pin strip, 11.5 mm long
Quantity Order No. Cable type Assembly Length [m] 1 )
1 2302340 / 25S / C36 / 11.50
09S = 9-pos. shielded
C00 = no assembly
1) min. 0.20 m
15S = 15-pos. shielded
25S = 25-pos. shielded
37S = 37-pos. shielded
50S = 50-pos. shielded
C01 = 9-pos. D-SUB socket strip at one end
9-pos. D-SUB pin strip at one end
C28 = 15-pos. D-SUB socket strip at one end
15-pos. D-SUB pin strip at one end
C36 = 25-pos. D-SUB socket strip at one end
25-pos. D-SUB pin strip at one end
C43 = 37-pos. D-SUB socket strip at one end
37-pos. D-SUB pin strip at one end
C49 = 50-pos. D-SUB socket strip at one end
50-pos. D-SUB pin strip at one end
Sample order for round cable set assembled with socket strip at both ends
– Shielded 37-pos. round cable, assembled with two 37-pos. D-SUB socket strips, 12.75 m long
Quantity Order No. Cable type Assembly Length [m] 1 )
1 2302421 / 37S / C44 / 12.75
09S = 9-pos. shielded
C00 = no assembly
1) min. 0.20 m
15S = 15-pos. shielded
25S = 25-pos. shielded
37S = 37-pos. shielded
50S = 50-pos. shielded
C22 = 9-pos. D-SUB socket strip at both ends
C29 = 15-pos. D-SUB socket strip at both ends
C37 = 25-pos. D-SUB socket strip at both ends
C44 = 37-pos. D-SUB socket strip at both ends
C50 = 50-pos. D-SUB socket strip at both ends
Sample order for round cable set assembled with pin strip at both ends
– Shielded 15-pos. round cable, assembled with two 15-pos. D-SUB pin strips, 8.5 m long
Quantity Order No. Cable type Assembly Length [m] 1 )
1 2302434 / 15S / C71 / 8.50
09S = 9-pos. shielded
C00 = no assembly
1 )min. 0.20 m
15S = 15-pos. shielded
25S = 25-pos. shielded
37S = 37-pos. shielded
50S = 50-pos. shielded
C70 = 9-pos. D-SUB pin strip at both ends
C71 = 15-pos. D-SUB pin strip at both ends
C72 = 25-pos. D-SUB pin strip at both ends
C73 = 37-pos. D-SUB pin strip at both ends
C74 = 50-pos. D-SUB pin strip at both ends
272 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com