Phoenix Contact INTERFACE System Cabling and ... - Power/mation

INTERFACE Cabling
VARIOFACE system cabling
ABB S800 I/O
Termination boards with knife
disconnection
The ABB S800 I/O system offers the
possibility of realizing the process wiring
with D-SUB plug connectors. ABB TU 812
Compact MTU are available for this
purpose.
The FLKM-D25SUB/B/KDS3-MT/...
modules are connected to the I/O modules
using assembled D-SUB cables (refer to
chapter System cables).
In addition to screw connection with
knife disconnection for every channel and
ABB S800-specific labeling, the modules
have the following features:
– Eight negative terminals with knife
disconnection (TU810)
– Eight positive terminals with knife
disconnection (TU810/P)
– For each channel, there is a positive and
negative terminal with knife
disconnection (TU830)
Passive interface modules can also be
used for signal transmission (e.g. UM 45-
D25 SUB/B, 2962748, refer to the Wiring
interface chapter).
Connectable I/O modules
Card type
Digital input DI 810
DI 811
DI 814
DI 830
DI 831
DI 885
FLKM-D25SUB...
Notes:
Type of housing:
Terminal blocks: Polyamide PA non-reinforced, color: green.
Housing: PVC
For marking systems and mounting material, see CLIPLINE catalog.
Description
No. of
pos.
VARIOFACE module, with knife disconnect terminal blocks for:
H W
D
FLKM-D25SUB/B/KDS3-MT/...
Interface module with knife disconnect terminal blocks
Module width
W Type Order No. Pcs. /
Pkt.
- S800 I/O output modules 25 126.5 mm FLKM-D25 SUB/B/KDS3-MT/TU810 2304513 1
- S800 I/O input modules 25 126.5 mm FLKM-D25 SUB/B/KDS3-MT/TU810/P 2304539 1
- S800 I/O universal module 25 247.5 mm FLKM-D25 SUB/B/KDS3-MT/TU830 2304526 1
Technical data
Max. perm. operating voltage
50 V AC/DC
Max. perm. current (per branch)
2 A
Max. total current (voltage supply)
4 A (8 A L1-/L2-)
Rated surge voltage
1.4 kV
Ambient temperature range -20°C ... 50°C
Mounting position
Any
Standards/regulations DIN EN 50178, IEC 62103
Connection method Field level Screw connection with disconnect knife
Control system level D-SUB socket
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
Dimensions H / D 61 mm / 90 mm
Digital output DO 810
DO 814
Analog input AI 810
AI 820
AI 830
AI 835
Analog output AI 810
AI 820
L1+
L1+
L1-
L1-
L2+
L2+
L2-
L2-
14 15 16 17 18 19 10 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13
L1+
L1+
L1-
L1-
L2+
L2+
L2-
L2-
14 15 16 17 18
1 2 3 4 5 6
19 20 21 22
7 8 9 10
23
11
24 25
12 13
B1C1B2C2B3C3B4C4B5C5B6C6B7C7B8C8
B1C1B2C2B3C3B4C4B5C5B6C6B7C7B8C8
A1 A2 A3 A4 A5 A6 A7 A8
+1 +2 +3 +4 +5 +6 +7 +8
FLKM-D25 SUB/B/KDS3-MT/TU810 connection scheme
FLKM-D25 SUB/B/KDS3-MT/TU810/P connection scheme
L1+
L1+
L1-
L1-
L2+
L2+
L2-
L2-
14 15 16 17 18 19 20 21 22 23 24 25
1 2 3 4 5 6 7 8 9 10 11 12 13
C1 C2 C3 C4 C5 C6C7C8C9C10C11C12C13C14C15C16
Explanation:
Flat-ribbon cable strip
Connection to I/O card
Screw terminal blocks for separate supply
188 PHOENIX CONTACT
A1 A2 A3 A4 A5 A6A7A8A9A10A11A12A13A14A15A16
B1 B2 B3 B4 B5 B6B7B8B9B10B11B12B13B14B15B16
FLKM-D25 SUB/B/KDS3-MT/TU830 connection scheme
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com