Phoenix Contact INTERFACE System Cabling and ... - Power/mation

Siemens SIMATIC ® S7-300
Front adapter for
MINI analog system cabling
The FLKM 16-PA-331-1KF/I/MINI-MCR
front adapter helps in system cabling in
conjunction with the MINI Analog system
adapter and a 16-pos. system cable FLK
16/EZ-DR/.../KONFEK, refer to page 264.
Instead of the conventional front
connector, screw terminal blocks are used
to snap this component onto the analog
module.
The DIP switches can be used to connect
"M-" connections to each other and to the
central ground of the system.
The front adapter supports only current
signals.
The front adapter is suitable for the
following analog input card:
– 6ES7 331-1KF01-0AB0
0
1
2
3
4
5
6
7
M–
M–
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1
2
3
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
9 10 11 12 13 14 15 16
FLKM 16-PA-331-1KF/I/MINI-MCR connection scheme
4
5
6
7
8
INTERFACE Cabling
VARIOFACE system cabling
FLKM 16-PA-331-1KF/I/...
Description No. of pos. Type Order No.
Pcs. /
Pkt.
VARIOFACE front adapter, for SIMATIC ® S7-300, only in
connection with MINI MCR-SL-V8-FLK 16-A
16 FLKM 16-PA- 331-1KF/I/MINI-MCR 2318237 1
Technical data
Max. perm. operating voltage
30 V AC/DC
Max. permissible current
50 mA (per path)
Rated surge voltage / insulation
0.5 kV / basic insulation
Ambient temperature (operation) -20°C ... 60°C
Ambient temperature (storage/transport) -20°C ... 70°C
Standards/regulations DIN EN 50178 / IEC 62103
Siemens SIMATIC ® S7-300
Front adapter for
MINI analog system cabling
The FLKM 16-PA-332-5HF/I/MINI-MCR
front adapter helps in system cabling in
conjunction with the MINI Analog system
adapter and a 16-pos. system cable FLK
16/EZ-DR/.../KONFEK, refer to page 264.
Instead of the conventional front
connector, screw terminal blocks are used
to snap this component on to the analog
module.
The front adapter supports only current
signals.
The front adapter is suitable for the
following analog output cards:
– 6ES7 332-5HF00-0AB0
L+
M–
M–
M ANA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1
2 3
4 5
6 7
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
9 10 11 12 13 14 15 16
FLKM 16-PA-332-5HF/I/MINI-MCR connection scheme
8
FLKM 16-PA-332-5HF/I/...
Description No. of pos. Type Order No.
VARIOFACE front adapter, for SIMATIC ® S7-300, only in
connection with MINI MCR-SL-V8-FLK 16-A
Technical data
Max. perm. operating voltage
Max. permissible current
Pcs. /
Pkt.
16 FLKM 16-PA- 332-5HF/I/MINI-MCR 2318240 1
30 V AC/DC
50 mA (per path)
500 mA (per connection, supply via separate power supply)
Rated surge voltage / insulation
0.5 kV / basic insulation
Ambient temperature (operation) -20°C ... 60°C
Ambient temperature (storage/transport) -20°C ... 70°C
Standards/regulations DIN EN 50178 / IEC 62103
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com
PHOENIX CONTACT
211