Phoenix Contact INTERFACE System Cabling and ... - Power/mation

INTERFACE Cabling
VARIOFACE system cabling
Output modules for solid-state relay,
1 N/O contact
These VARIOFACE output modules are
used in combination with the respective
front adapters.
Like the front adapters, the modules are
connected via 14-pos. or 50-pos. system
cables.
With the 32-channel version, the system
cable is connected to the base module with
16 channels UMK-16 OM/AMSC/PLC.
The output expansion module UMK-16
OM/AMSC/E/PLC with a further 16 channels
is coupled to the base module via a 20-
position flat-ribbon cable (length: 10 cm).
The modules are equipped with special
Phoenix sockets SIM-AMSC for taking up
Generation 4 solid-state relays (G4 Direct)
from the company OPTO 22. Eight or 16
solid-state relays can be plugged onto these
compact design modules. The power
outputs of the semiconductor relays are
protected against overload by a plug-in fuse
directly on the solid-state relay.
Notes:
Type of housing:
Terminal blocks: Polyamide PA non-reinforced, color: green.
Housing: PVC
For marking systems and mounting material, see CLIPLINE catalog.
The connection cable between the base and the extension modules
is delivered with the extension unit.
Optocoupler can be purchased from Opto 22 (www.OPTO22.com).
H W
D
UMK-8 OM/AMSC/PLC
Output module for 8 pluggable solid-state relays
u P
1 2 8 9 1113101214+ -
1
2
8
14 13 24 23 84 83
Module width
Description
W Type Order No. Pcs. /
Pkt.
VARIOFACE output module, for eight channels with plug-in base
for solid-state relays, generation 4 of OPTO 22
123.5 UMK- 8 OM/AMSC/PLC 2976420 1
VARIOFACE output module, for 16 channels with plug-in base for
solid-state relays, generation 4 of OPTO 22
259
VARIOFACE output extension module, for 16 channels with
plug-in base for solid-state relays, generation 4 of OPTO 22
259
Technical data
Input data
Operating voltage U N
24 V DC
Operating voltage display
LED green
Type of connection Flat-ribbon cable plug connector in acc. with IEC 60603-13
No. of pos. 14
Output data
Max. operating voltage
250 V AC/DC (data is module-specific)
Continuous load current
6 A
Type of connection
Screw connection
Connection data solid / stranded / AWG 0.14 ... 1.5 mm² / 0.14 ... 1.5 mm² / 26 - 14
General data
Test voltage
4 kV AC (50 Hz, 1 min)
Ambient temperature range -20°C ... 50°C
Standards/regulations IEC 60664, DIN EN 50178, IEC 62103
Mounting position
Any
Dimensions H / D 87 mm / 90 mm
256 PHOENIX CONTACT
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com