Phoenix Contact INTERFACE System Cabling and ... - Power/mation

INTERFACE Cabling
VARIOFACE system cabling
Output modules with relay, 1 PDT
These VARIOFACE output modules are
used in combination with the respective
front adapters.
Like the front adapters, the modules are
connected via 14-pos. or 50-pos. system
cables. The following features characterize
these relay modules:
– Pluggable miniature relays, each with a
PDT contact
– Slim construction widths of only 80 mm
(8 channels) or 271 mm (32 channels)
– LED status display for each signal path and
supply voltage
– Free-wheeling and reverse polarity
protection diode for each signal path.
H W
D
UM-8RM/RT-G24/21/PLC
Output module with eight miniature relays,
1 PDT
u
H W
D
UM-32RM/RT-G24/21/PLC
Output module with 32 miniature relays,
1 PDT
u
Notes:
Type of housing:
Terminal blocks: Polyamide PA non-reinforced, color: green.
Housing: PVC
For marking systems and mounting material, see CLIPLINE catalog.
1 2 3 4 5 6 7 8 9 11 13 10 12 14
1
3
5
7
1,2,13,14,25,26,37,38
11,12,23,24,35,36,47,48
3
4
9
10
1 7
15
16
9
45
46
31
2 4 6 8
2 8
10
32
22
21
24
42
41
44
62
61
64
82
81
84
+ -
+
+
+
-
22
21
24
82
81
84
102
101
104
322
321
324
12
11
14
32
31
34
52
51
54
72
71
74
12
11
14
72
71
74
92
91
94
321
311
314
Description
Module width
W Type Order No. Pcs. /
Pkt.
Type
Order No.
Pcs. /
Pkt.
VARIOFACE output module, with eight miniature relays, plugged,
for 24 V DC (incl. relays)
80 UM- 8 RM/RT-G24/21/PLC 2968386 1
VARIOFACE output module, with 32 miniature relays, plugged,
for 24 V DC (incl. relays)
271 UM-32 RM/RT-G24/21/PLC 2968373 1
Plug-in miniature relay, with power contact REL-MR- 24DC/21HC 2961312 10 REL-MR- 24DC/21HC 2961312 10
Technical data
Coil side
Operating voltage U N 24 V DC 24 V DC
Typ. input current at U N 18 mA 18 mA
Typ. response time at U N 8 ms 8 ms
Typ. release time at U N 10 ms 10 ms
Input circuit Free-wheeling diode Free-wheeling diode
Status display/channel LED yellow LED yellow
Type of connection Flat-ribbon cable plug connector in acc. with IEC 60603-13 Flat-ribbon cable plug connector in acc. with IEC 60603-13
No. of pos. 14 50
Contact side
Contact type Single contact, 1 PDT Single contact, 1 PDT
Contact material AgNi AgNi
Max. switching voltage 250 V AC/DC 250 V AC/DC
Min. switching voltage 12 V AC/DC 12 V AC/DC
Limiting continuous current 5 A 5 A
Min. switching current 100 mA 100 mA
Max. interrupting rating: 24 V DC 120 W 120 W
48 V DC 58 W 58 W
60 V DC 48 W 48 W
110 V DC 50 W 50 W
220 V DC 80 W 80 W
250 V AC 1250 VA 1250 VA
Type of connection Screw connection Screw connection
Connection data solid / stranded / AWG 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12 0.2 ... 4 mm² / 0.2 ... 2.5 mm² / 24 - 12
General data
Test voltage 2.5 kV (50 Hz, 1 min) 2.5 kV (50 Hz, 1 min)
Ambient temperature range -20°C ... 50°C -20°C ... 50°C
Rated operating mode 100% operating factor 100% operating factor
Mechanical life 3 x 10 7 cycles 3 x 10 7 cycles
Standards/regulations IEC 60664, DIN EN 50178, IEC 62103 IEC 60664, DIN EN 50178, IEC 62103
Mounting position Any Any
Assembly In rows with zero spacing In rows with zero spacing
Dimensions H / D 68 mm / 123 mm 68 mm / 123 mm
Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108
info@powermation.com - 800-843-9859 - www.powermation.com
PHOENIX CONTACT
249