CERN Program Library Long Writeup W5013 - CERNLIB ...

CALL GDMAN
CALL GWOMA1
CALL GDWMN2
CALL GDWMN3
(U0,V0)
(U0,V0)
(U0,V0)
(U0,V0)
U0
V0
(REAL) U coordinate of the centre of the figure;
(REAL) V coordinate of the centre of the figure.
Draws the profile of a man, or three different female figures in 2D user coordinates, with the current scale
factors. The figure is approximately 160 cm high.
CALL GDRAWT
(U,V,CHTEXT,SIZE,ANGLE,LWIDTH,IOPT)
U (REAL) U position of text string;
V (REAL) V position of text string;
CHTEXT (CHARACTER*(*)) text string;
SIZE (REAL) character size (cm);
ANGLE (REAL) rotation angle (degrees);
LWIRTH (INTEGER) line width (1,2,3,4,5);
IOPT (INTEGER) centering option for the text:
-1 left adjusted;
0 centered;
1 right adjusted.
Draws text with software characters. It has the same arguments of the HPLOT [7] routine HPLSOF (a call to
HPLSOF is actually performed).
CALL GDRAWV
(U,V,NP)
U
DT
NP
(REAL) array of U coordinates;
(REAL) array of V coordinates;
(INTEGER) number of points.
Draws 2D polylines in user coordinates. The routine GDFR3D can be called to transform 3D points in 2D
user coordinates.
CALL GDHEAD
(ISEL,CHNAME,CHRSIZ)
ISEL
(INTEGER) option to be selected for the title name (decimal integer):
0 only the header lines;
xxxxx1 add the text CHNAME centered on top of header;
xxxx1x add global detector name (first volume) on left;
xxx1xx add date on right;
xx1xxx select thick characters for text in top of head (i.e. with larger line width);
98 DRAW400 – 3