CERN Program Library Long Writeup W5013 - CERNLIB ...

YES
NO
6.7 SCONS name numed inrdw outrdw inrup outrup halfz sphi ephi [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
INRDW R “Inside Radius in Lower Z Surface”
OUTRDW R “Outside Radius in Lower Z Surface”
INRUP R “Inside Radius in Upper Z Surface”
OUTRUP R “Outside Radius in Upper Z Surface”
HALFZ R “Half Z length”
SPHI R “Start of section PHI” R=0.:360.
EPHI R “End of section PHI” R=0.:360.
YESNO C “GSPOSP option” D=’NO’
Possible YESNO values are:
YES
NO
6.8 SSPHE name numed inrad outrad sphi ephi stheta etheta [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
INRAD R “Inside Radius”
OUTRAD R “Outside Radius”
SPHI R “Start of section PHI” R=0.:360.
EPHI R “End of section PHI” R=0.:360.
STHETA R “Start of section THETA”
ETHETA R “End of section THETA”
YESNO C “GSPOSP option” D=’NO’
Possible YESNO values are:
YES
NO
6.9 SPARA name numed halfx halfy halfz axis phi theta [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
HALFX R “Half X length”
HALFY R “Half Y length”
HALFZ R “Half Z length”
AXIS R “Angle of Y mid-faces segment to Y axis” R=0.:360.
PHI R “PHI angle of Low Z mid-face to High Z mid-face segment” R=0.:360.
385 XINT002 – 29