CERN Program Library Long Writeup W5013 - CERNLIB ...

YES
NO
6.4 STUBE name numed inrad outrad halfz [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
INRAD R “Inside Radius”
OUTRAD R “Outside Radius”
HALFZ R “Half Z length”
YESNO C “GSPOSP option” D=’NO’
Possible YESNO values are:
YES
NO
6.5 STUBS name numed inrad outrad halfz sphi ephi [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
INRAD R “Inside Radius”
OUTRAD R “Outside Radius”
HALFZ R “Half Z length”
SPHI R “Start of section PHI” R=0.:360.
EPHI R “End of section PHI” R=0.:360.
YESNO C “GSPOSP option” D=’NO’
Possible YESNO values are:
YES
NO
6.6 SCONE name numed inrdw outrdw inrup outrup halfz [ yesno ]
NAME C “Volume name”
NUMED I “Tracking medium number”
INRDW R “Inside Radius in Lower Z Surface”
OUTRDW R “Outside Radius in Lower Z Surface”
INRUP R “Inside Radius in Upper Z Surface”
OUTRUP R “Outside Radius in Upper Z Surface”
HALFZ R “Half Z length”
YESNO C “GSPOSP option” D=’NO’
Possible YESNO values are:
XINT002 – 28 384