CERN Program Library Long Writeup W5013 - CERNLIB ...

9.BL2 half-length along x of the side at -H2 in y of the face at +DZ in z;
10.TL2 half-length along x of the side at +H2 in y of the face at +DZ in z;
11.ALP2 angle with respect to the y axis from the centre of the side at -H2 in y to the centre
of the side at +H2 in y of the face at +DZ in z;
5 TUBE tube. It has 3 parameters:
1.RMIN inside radius;
2.RMAX outside radius;
3.DZ half length in z;
6 TUBS φ segment of a tube. It has 5 parameters:
1.RMIN inside radius;
2.RMAX outside radius;
3.DZ half length in z;
4.PHI1 starting angle of the segment;
5.PHI2 ending angle of the segment;
PHI1 should be smaller than PHI2. If this is not the case, the system adds 360 degrees to PHI2.
7 CONE conical tube. It has 5 parameters:
1.DZ half-length in z;
2.RMN1 inside radius at -DZ in z;
3.RMX1 outside radius at -DZ in z;
4.RMN2 inside radius at +DZ in z;
5.RMX2 outside radius at +DZ in z;
8 CONS φ segment of a conical tube. It has 7 parameters:
1.DZ half-length in z;
2.RMN1 inside radius at -DZ in z;
3.RMX1 outside radius at -DZ in z;
4.RMN2 inside radius at +DZ in z;
5.RMX2 outside radius at +DZ in z;
6.PHI1 starting angle of the segment;
7.PHI2 ending angle of the segment;
PHI1 should be smaller than PHI2. If this is not the case, the system adds 360 degrees to PHI2.
9 SPHE segment of spherical shell. It has 6 parameters:
1.RMIN inside radius of the shell;
2.RMAX outside radius of the shell;
3.THE1 starting polar angle of the shell;
4.THE2 ending polar angle of the shell;
5.PHI1 starting azimuthal angle of the shell;
6.PHI2 ending azimuthal angle of the shell;
10 PARA parallelepiped. It has 6 parameters:
1.DX half-length in x;
2.DY half-length in y;
3.DZ half-length in z;
GEOM050 – 2 111