CERN Program Library Long Writeup W5013 - CERNLIB ...

10 GEANT/DZ
10.1 SURV name [ number ]
NAME C “Bank name”
NUMBER I “Bank number” D=1
Print a survey of the structure identified by NAME, NUMBER.
10.2 SHOW name [ number chopt ]
NAME C “Bank name”
NUMBER I “Bank number” D=1
CHOPT C “Options” D=’BSV’
Display the contents of a bank or a data structure identified by its NAME and NUMBER. The output format
of the data part is controlled by the internal or external I/O characteristic.
CHOPT=’B’ Print the bank.
CHOPT=’S’ Print the bank contents from left to right Sideways
with up to ten elements per line.
CHOPT=’V’ Print the vertical (down) structure.
CHOPT=’D’ Print the bank contents from top to bottom Downwards
with five elements per line.
CHOPT=’L’ Print the linear structure.
CHOPT=’Z’ Print the data part of each bank in hexadecimal format
10.3 SNAP [ idiv chopt ]
IDIV I “Division number ” D=2 R=0:24
CHOPT C “Options” D=’M’
Snap of one or more divisions. Provides a snapshot of one or more divisions in a ZEBRA store. The kind
of information provided is controlled by CHOPT.
CHOPT=’M’ Print Map entry for each bank
CHOPT=’E’ Extend map entry to dump all links of each bank
(otherwise only as many links as will fit on a line)
CHOPT=’F’ Full. Dump all active banks, links and data
CHOPT=’K’ Kill. Dropped banks to be treated as active
(dropped banks are not normally dumped under D or F option)
CHOPT=’L’ Dump all Link areas associated with the store
CHOPT=’W’ Dump the Working space, links and data
CHOPT=’Z’ Dump the information in hexadecimal.
10.4 VERIFY [ idiv chopt ]
IDIV I “Division number ” D=0 R=0:24
CHOPT C “Options” D=’CLSU’
XINT002 – 40 396