PDF catalog - Who-sells-it.com

Chevy Small-Block LS Series v-8
LS Intake Manifolds Continued
A. 19166948 NEW
LSX-LS7 Standard Deck 4-bbl Manifold
• Single-plane design for mid-range and top-end power
• LS7 style port
• Injector/nitrous bosses cast-in
• Extra thick for professional porting
• 4150 style carb. mounting provision
• Uses OEM O-ring gaskets (included)
• Tall deck version available as P/N 19166949
B. 19166950 NEW
LSX-CT Standard Deck 4-bbl Manifold
• No-holds-barred single plane design for large displacement
or high-rpm applications
• LSX-CT/DR style port; minor port matching required for
optimal port match
• Two-sets of injector/nitrous bosses are cast-in for extreme
power capability
• Extra thick for professional porting and/or boosted applications
• 1/2" raised 4150 style carb. mounting pad
• Tall deck version available as P/N 19166951
C. 19166954 NEW
LSX-DR Standard Deck 4-bbl Manifold
• The ultimate drag racing single plane for large displacement
or high-rpm applications
• LSX-CT/DR style port; minor port matching required for
optimal port match
• Two-sets of injector/nitrous bosses are cast-in for extreme
power capability
• Extra thick for professional porting and/or boosted
applications
• 1" raised 4500 style carb. mounting pad
• Tall-deck version available as P/N 19166955
NEW!
A LSX-LS7 Standard Deck 4-bbl Manifold
NEW!
Carburetor Spacer,
Single Plane, One"
D
LS Front Distributor
Drive Cover
LS7 Carb Intake Gasket
E
F
D. 88965830
Carburetor Spacer, Single Plane, One-Inch
• Fully CNC’d from billet aluminum
• GM Performance Parts logo machined into front and back
88965832
Carburetor Spacer, Single Plane, One-Inch,
Dominator (not shown)
• Fully CNC’d from billet aluminum
• GM Performance Parts logo machined into front and back
E. 88958679
LS Front Distributor Drive Cover
• Assembly is manufactured for applications where a
four-barrel carburetor and distributor are required
• Can be combined with GM’s Bowtie valve covers,
P/N 25534398 and P/N 25534399, for a complete
traditional-looking engine package
• For all LS Series engines except LS7 and LS9
NOTE: Distributor and mechanical fuel pump not included. Uses
Small-Block Ford style distributor and mechanical fuel pump.
Special water pump, accessory drive and damper required.
F. 19172113
LS7 Carb Intake Gasket
• For use with intake manifold P/N 25534394 or
P/N 25534413
G. 19172114
L92 Carb Intake Gasket
• For use with intake manifold P/N 88958675
19156564
LS2 Carb Intake Gasket (not shown)
• For use with intake manifold P/N 88958675
Chevy Ls Series
EXHAUST MANIFOLD/HEADER
H. 12480130
Header Flange
• These 3/8" thick steel header flanges are a great way to
start a fabricated set of LS Series headers for a race car
or street rod
• For stock LS1, LS2, LS3, LS6, LS7 and L92 (may require
clearancing) exhaust ports
• Sold individually
1977 Camaro Z28
L92/LS3 Carb Intake Gasket
G
B
LSX-CT Standard Deck 4-bbl Manifold
NEW!
A great idea never goes out of style, and the Z28 was
a perfect example. After a two-model-year hiatus, the
Z28 returned—without a slash—but gone was the emphasis
on high-compression, high-rpm engines. The
new Z28 was all about handling. It was no surprise the
Z apexed again in ’77, as part of the popular Camaro
lineup that outsold its pony car rival by a landslide.
That legend grew as the top race drivers of the day
competed in the International Race of Champions in
Z28s, with AJ Foyt winning the championship. The
street version’s 350-cubic-inch Small-Block picked up
15 horsepower over the standard LM-1 Small-Block,
due in large part to a free-flowing exhaust system,
resulting in185 horsepower and 280 lb-ft of torque.
Car and Driver extracted a 16.3-second quarter mile
at 83.1 mph from a 49-state-spec car, as California
regulations dinged the Z with a 10-horse penalty and
an automatic as the only transmission choice.
Header Flange H
Intake Manifolds: additional required components
Part Number gaskets (Quantity) Bolts (Quantity) engine Application
88894339 12533587 (2) 12552344 (10) MY04/05 LS1 and LS6
12568976 89017840, Kit (1), 89017852 (1) 12579938 (10) MY06/07 LS7
25534394/25534913 19172113 Included with manifold LS7 Carb Applications
25534401/25534416 19172114 Included with manifold L76/L92 and LS3 Carb Applications
C
LSX-DR Standard Deck 4-bbl Manifold
88958675 19156564 Included with manifold LS2 Carb Applications
224 Buy online at www.gmperformanceparts.com
Available for purchase online at
gmperformanceparts.com
225