PDF catalog - Who-sells-it.com

Chevy Big-Block v-8
Intake Manifolds: additional required components
Part Number Gaskets (Quantity) Bolts (Quantity) engine Application
12464484 12366985 (1) 12497460 (1) 12499121, 12497323
12464482 12366985 (1) 12367959 (1) 12499121, 12497323
88961161 88962213 (1) 12367959 (1) 12498793
12363420 12366985 (1) 12367959 (1) 12498777, BB Oval Port High Rise
12363407 12366985 (1) 12367959 (1) 12496962, 12371171, CNC version of 12363406
19131359 12506106 (2) 10198997 (14), 9349918 (2) 12568774, BB Dual Plane
88962218 88962213 (1) 12367959 (1) 12498827
ManiFold Accessories and Gaskets
A. 12555320
Oil Shield
• Isolates hot engine oil from the air/fuel mixture
B. 10174981
Gasket Kit, 1965-1981 Oval Port Heads
• This kit is used on all 1965-1981 oval port iron cylinder heads
• Includes 2 gaskets
C. 12366985
Gasket, Aluminum Oval Port Heads
• Designed for Big-Block aluminum heads P/N 12363390,
P/N 12363392 and P/N 12363399
• Use with manifold P/N 12363406, P/N 12363407,
P/N 12363420 or P/N 12363421
Bolt Kit, Intake Manifold
D
88962213
Intake Manifold Gasket (not shown)
• Use on all Big-Block engines with rectangular intake port
heads 396 through 572-cubic-inch
• Includes 2 gaskets
12506106
Gasket, 454 and 502 Engines (not shown)
• Used on 454 and 502 engines; with restricted heat crossover
passages
• 1 gasket per package; order 2 per engine.
D. 12367959
Bolt Kit, Intake Manifold
• For any Big-Block Chevrolet engine
• Includes 16 bolts: 3/8-16 x 1.5" with wide, underhead
flange with a 7/16" hex head
• Rated at 170,000 psi and will give consistent torque load
• Includes 16 hardened flat washers
NOTE: Four of these washers are smaller in diameter for use
around the front water passages.
Chrome Water Necks
E. 12342024
Water Neck
• Chrome water neck with neoprene O-ring and chrome bolts
• For 1966-1975 Chevrolet, Camaro, and Chevelle
V-8 engines
Air Cleaners
Chevy Big-Block v-8
A
Oil Shield
Water Neck
E
F. 12342080
Air Cleaner, Chevrolet-Logo High-Performance
Design
• 14" round high-performance style air cleaner has chrome
lid with embossed Chevrolet name
• Fits most four-barrel and two-barrel carburetors
• Will not fit Dominator-style carburetors
NOTE: Check clearance between hood and top of air cleaner.
Minimum clearance is 3.75" from top of carburetor gasket
area to underside of hood.
2002 Camaro SS AnniversAry
G. 12342071
Air Cleaner, Chevrolet-Logo Classic Design
• 14" round classic-style air cleaner has chrome lid with
embossed Chevrolet name and Bowtie attaching nut
• Fits most four-barrel and two-barrel carburetors
• Will not fit Dominator-style carburetors
“It’s the Camaro you always dreamed of owning,”
exclaimed the ’02 Camaro brochure of the Camaro SS.
It was any easy car to remember, thanks to a completely
unique package featuring red paint, checkered heritage
stripes, unique wheels, two-tone interiors, and much
more. Only 3,369 SS were ordered with this package
(RPO Z4C), with the T-top coupes being slightly more
popular than the convertibles.
The anniversary cars weren’t all stripes and hype, however.
Of the cammed-up LS1 in the SS, the brochure
added that the “resemblance to the Corvette was purely
intentional,” and with 325 horse and 350 lb-ft on tap,
there was no argument. In fact GM High Tech Performance
extracted a 13.579-second quarter mile at 101.91
mph from the heaviest SS available, an automatic convertible,
proving the LS1 muscled up in just a few short
years and that the modern Small-Block could run with
many of its heralded muscle car forefathers.
B
Gasket Kit, 1965-1981 Oval Port Heads
Air Cleaner, Chevrolet-Logo High-Performance Design
F
C
Gasket, Aluminum Oval Port Heads
Air Cleaner, Chevrolet-Logo Classic Design
G
268 Buy online at www.gmperformanceparts.com
Available for purchase online at
gmperformanceparts.com
269