You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CRATE ENGINES LS SERIES<br />
Available for purchase online at<br />
gmperformanceparts.<strong>com</strong><br />
LS3 6.2L<br />
19201992<br />
More than 400 hp and 400 lb-ft of torque<br />
from our corvette-based crate engine!<br />
As one of the newest members of the LS engine family, the LS3 6.2L<br />
engine has benef<strong>it</strong>ed from all of the forward-thinking technology that has<br />
kept this engine series at the forefront of modern performance. It was<br />
introduced on the 2007 Corvette and debuts in 2009 in the all-new Camaro.<br />
The GM Performance Parts LS3 6.2L crate engine is based on the Corvette<br />
application, including the oil pan. It <strong>com</strong>es <strong>com</strong>plete w<strong>it</strong>h the ign<strong>it</strong>ion system,<br />
manifold assembly w<strong>it</strong>h injectors and throttle body, exhaust manifolds, water<br />
pump, balancer and 14-inch automatic-transmission flexplate.<br />
Inside, the LS3 is filled w<strong>it</strong>h <strong>com</strong>ponents designed for high performance<br />
and longev<strong>it</strong>y. The aluminum block is filled w<strong>it</strong>h a sturdy reciprocating<br />
assembly that <strong>com</strong>bines w<strong>it</strong>h L92-type rectangular-port heads to deliver<br />
a 10.7:1 <strong>com</strong>pression ratio. A high-lift, hydraulic roller camshaft delivers a<br />
whopping 0.551-inch of lift on the 2.165-inch intake valves and 0.522-inch lift<br />
on the 1.59-inch exhaust valves. It holds those valves open for 204-degrees<br />
of rotation (intake) and 211-degrees (exhaust), respectively, enhancing the<br />
LS3’s tremendous airflow and table-flat torque curve.<br />
See page 300 for information on our reference guide P/N 88959384 for installing<br />
an LS engine in an older car.<br />
Check out gmperformanceparts.<strong>com</strong> for a list of Power Packages<br />
to improve the performance of this engine!<br />
BiG POwer aNd TOrque<br />
fully dressed asseMBly<br />
430 hP / 424 lB-fT TOrque<br />
INSTALLATION NOTES<br />
• 14-inch automatic transmission flexplate<br />
included<br />
• Assembly does not include any electronics<br />
• LS3 Controller K<strong>it</strong>, P/N 19201861, available for<br />
non-Corvette applications. K<strong>it</strong> includes electronic<br />
throttle pedal, which is required for throttle input<br />
to the ECU (see page 288)<br />
• 2009 throttle body is installed on engine. To use<br />
LS3 Controller K<strong>it</strong>, P/N 19201861, 2008 throttle<br />
body (supplied) must be installed<br />
• Includes Corvette wet sump oil pan<br />
• Intended for pre-1976 street vehicles or any<br />
off-road vehicle<br />
• Not intended for marine applications<br />
• Non-Corvette applications require flexplate<br />
P/N 12602448<br />
CRATE ENGINES LS SERIES<br />
ls3 6.2l dyno chart<br />
Possible aPPlications*<br />
ls3 6.2l tech sPecs<br />
Bring the latest GM small-Block to<br />
an old friend<br />
Put <strong>it</strong> between the frame rails of<br />
your latest project car<br />
Build a buggy!<br />
*Applications have not been validated.<br />
They are merely suggestions of how you<br />
might enjoy your GM Performance Parts<br />
crate engine. Some applications may affect<br />
engine warranty. See page 352 for specific<br />
warranty information. Some applications<br />
may not be emission-legal; check state and<br />
local ordinances.<br />
Part Number: 19201992<br />
Engine Type: LS Series Gen IV Small-Block V-8<br />
Displacement (cu in):<br />
376 cu in (6.2L)<br />
Bore x Stroke (in):<br />
4.06 x 3.62 (103.25 x 92mm)<br />
Block (P/N 12584727):<br />
Cast-aluminum w<strong>it</strong>h 6 bolt,<br />
cross-bolted main caps<br />
Crankshaft (P/N 12597569): Nodular iron<br />
Connecting Rods (P/N 12617570): Powdered metal<br />
Pistons (P/N 19168089):<br />
Hypereutectic aluminum<br />
Camshaft Type (P/N 12603844): Hydraulic roller<br />
Valve Lift (in):<br />
.551" intake / .522" exhaust<br />
Camshaft Duration (@.050 in): 204° intake / 211° exhaust<br />
Cylinder Heads (P/N 12615879): Aluminum L92 style port;<br />
as cast w<strong>it</strong>h 68cc chambers<br />
Valve Size (in):<br />
2.165 intake / 1.59 exhaust<br />
Compression Ratio: 10.7:1<br />
Rocker Arms (P/N 12569167 int): Investment-cast, roller trunnion<br />
Rocker Arms (P/N 10214664 exh): Investment-cast, roller trunnion<br />
Rocker Arm Ratio: 1.7:1<br />
Re<strong>com</strong>mended Fuel:<br />
92 octane<br />
Maximum Re<strong>com</strong>mended rpm: 6600<br />
Reluctor Wheel:<br />
58X<br />
Balanced:<br />
Internal<br />
Available for purchase online at<br />
gmperformanceparts.<strong>com</strong><br />
GM Performance Parts Crate Engines include a 24-month<br />
or 50,000-mile/80,000-kilometer lim<strong>it</strong>ed warranty.<br />
GM Performance Parts does not utilize any used<br />
or remanufactured parts in this crate engine.<br />
For a <strong>com</strong>plete list of parts to <strong>com</strong>plement and finish this engine, turn to page 80.<br />
68 Buy ONliNe aT www.GMPerfOrMaNceParTs.cOM<br />
Buy ONliNe aT www.GMPerfOrMaNceParTs.cOM<br />
69<br />
GMPP_2009_Pages058-089_final_rev.indd 68-69<br />
11/21/08 3:57:43 PM