Controller
Controller
Controller
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Specification Table<br />
Item<br />
Rated DC output voltage<br />
Rated DC output current<br />
Maximum momentary DC output current<br />
Rated output capacity<br />
Efficiency<br />
Rated input voltage (frequency)<br />
Input voltage range<br />
Input current<br />
Output retention time<br />
Protective circuit<br />
Parallel operation<br />
Ambient operating temperature<br />
Ambient operating humidity<br />
Cooling method<br />
Breakdown voltage<br />
Insulation resistance<br />
Circuit method<br />
Weight<br />
For enquiries,<br />
call 0800-888-0088 (toll-free).<br />
PS-241<br />
24V±10% (Varies depending on the load)<br />
8.5A<br />
17A<br />
204W<br />
PS-24 <strong>Controller</strong><br />
PS-242<br />
80% 80%<br />
AC100~115V (50/60Hz)<br />
AC85~125V<br />
AC200~230V (50/60Hz)<br />
AC170~250V<br />
3.5A (100VAC, full load) 1.8A (200VAC, full load)<br />
20 [msec] (at ambient temperature of 25°C and rated input/output conditions)<br />
Overcurrent protection, overvoltage protection, overheat protection, overload protection<br />
Supported<br />
0~50°C (subject to derating)<br />
30~85% RH (non-condensing)<br />
Natural air cooling<br />
Between input and output --- 2.0kVA, 1 minute (20mA)<br />
Between input and enclosure --- 2.0kVA, 1 minute (20mA)<br />
Between output and enclosure --- 100MΩ min. at 500VDC<br />
Externally excited fly-back converter<br />
Approx. 0.9kg<br />
<strong>Controller</strong> -<br />
Integrated Type<br />
Slider<br />
Type<br />
Rod<br />
Type<br />
Arm / Flat<br />
Type<br />
Gripper /<br />
Rotary Type<br />
Cleanroom<br />
Type<br />
Splash<br />
Proof Type<br />
<strong>Controller</strong><br />
External Dimensions<br />
24-VDC Power Supply<br />
PS-24<br />
5<br />
64.5<br />
31.5 33<br />
ø5 (for mounting)<br />
10<br />
139.7<br />
<strong>Controller</strong><br />
Models<br />
Gateway<br />
unit<br />
13<br />
PS-24<br />
M3.5 terminal screw<br />
ERC2<br />
PCON<br />
10<br />
158<br />
148±0.5<br />
138<br />
8<br />
R2.5 (for mounting)<br />
10<br />
5<br />
31.5<br />
5<br />
33<br />
ACON<br />
SCON<br />
Note<br />
• The PS-24 is not a constant-voltage power supply. Its output voltage changes in accordance with the load (the voltage will<br />
drop in accordance with the load factor). Therefore, do not connect the PS-24 to equipment other than IAI’s actuators.<br />
• Keep the maximum number of actuators operated in parallel to five. Do not use PS-24 and other power supplies together<br />
for parallel operation.<br />
• Take note that the PS-24 does not support series operation.<br />
• If multiple units are used side by side, provide a minimum clearance of approx. 20 mm between the adjacent units.<br />
• The PS-24 is naturally cooled by air. Accordingly, when installing the PS-24 give full consideration to ensuring natural<br />
convection in order to prevent heat from collecting around the power supply.<br />
• The enclosure of this product also serves as heat sink. Since the surface may be heated to very high temperatures, once<br />
the unit has been installed do not touch the enclosure to prevent burns.<br />
PSEL<br />
ASEL<br />
SSEL<br />
<strong>Controller</strong>-Integrated Type 294<br />
XSEL