SANMOTION F2 2-phase stepper motor and driver

Stepping motors with integrated drivers Dimensions P.70
Features
1. Driver and motor are now integrated into a single unit.
A driver incorporating a motion control function needed
for driving a motor and a 2-phase stepping motor were
integrated into a single unit for enabling a more compact
installation space and less wiring.
2. Three types of operation modes can be selected to
match the specific application.
1Pulse train interface mode:
Control by command pulses
2Parallel interface mode:
Program control by general-purpose I/O(Parallel)
3Serial interface mode:
Compliant with RS-485, half-duplex asynchronous
communication
DC input set model
Stepping Motor
Stepping motors with
integrated drivers
System configuration diagram
Host Devices
PLC
Dimensions
Stepping motor for
vacuum environment
Bundled cable for
input/output signal300 mm
Bundled cable for
DC power350 mm
DC24V
Switching
power supply
Noise filter
Electromagnetic
contractor
Molded case
circuit breaker
Single Phase
AC100V to 230V
Converts AC power
to DC power.
Filters out incoming
noise from power
line.
Switches driver
power on/off.
Use together with a
surge protector.
Protects the power
line.
Cuts off circuit in the
event of overcurrent.
55