SANMOTION F2 2-phase stepper motor and driver

Stepping Motor Page P.24
Basic step
angle
Motor size
Holding torque
Nm (ozin)
Model number
Specifications /
Characteristics
drawing
Page
Dimensions
0.9 42mm sq. (1.65inch sq.) 0.2 to 0.48 (28.3 to 68.0) SH142 - 1 P.29 to 30 P.65
0.9 60mm sq. (2.36inch sq.) 0.57 to 2.15 (80.7 to 304) SH160 - 0 P.42 to 43 P.66
1.8 14mm sq. (0.55inch sq.) 0.0065 (0.92) SH2141-55 1 P.24 P.64
1.8 28mm sq. (1.10inch sq.) 0.055 to 0.145 (7.79 to 20.5) SH228 -5 1 P.25 to 26 P.64
1.8 35mm sq. (1.38inch sq.) 0.12 to 0.23 (17.0 to 32.6) SH35 -12U 0 P.27 P.64
1.8
42mm sq. (1.65inch sq.)
Slim form
0.083 to 0.186 (11.8 to 26.3) SS242 -50 1 P.28 P.64
1.8 42mm sq. (1.65inch sq.) 0.2 to 0.51 (28.3 to 72.2) 103H52 - 0 P.31 to 33 P.64 to 65
1.8 50mm sq. (1.97inch sq.) 0.28 to 0.53 (39.7 to 75.1) 103H670 - 0 P.34 to 36 P.65
1.8
50mm sq. (1.97inch sq.)
Slim form
0.1 to 0.215 (14.2 to 30.4) SS250 -80 0 P.37 P.65
1.8 56mm sq. (2.20inch sq.) 0.39 to 2.0 (55.2 to 283) 103H712 - 0 P.38 to 41 P.66
1.8 60mm sq. (2.36inch sq.) 0.78 to 2.7 (110 to 382) 103H782 - 0 P.44 to 47 P.67
1.8
86mm sq. 3.39inch sq.,
CE and UL models are
available.
2.5 to 9 (358 to 1270)
SH286 - 1
SM286 -
P.48 to 51 P.68 to 69
1.8
106mm ( 4.17inch) 10.8 to 19 (1530 to 2690) 103H8922 - 1 P.52 P.69
Contact us for available encoders, gears and motors with brakes.
Stepping motors with integrated drivers Page P.55
Motor size Input source Interfaces Model number
42mm sq.
(1.65inch sq.)
60mm sq.
(1.65inch sq.)
DC24V
Pulse input
General-purpose I/O(Parallel)
Serial communication (compliant
with RS-485)
Specifications /
Characteristics
drawing
Page
Dimensions
DB21M142S-01 P.56 P.70
DB22M162S-01 P.56 P.70
Stepping motor for vacuum environment Page P.63
We customize motors for use in low to ultra-high vacuum environments to suit your system requirements.
We can handle a wide range of pressures for low, high and ultra-high vacuums.
7