SANMOTION F2 2-phase stepper motor and driver

Inquiry Check Sheet
For more information regarding any products or services described here in,
please contact your nearest office listed on the back of this catalog.
To SANYO DENKI Co.,LTD.
Date
Company:
Department:
Name:
Tel:FAX:
E-mail:
Item
Contents
❶ Name of target equipment Equipment name, category (transport, processing, test, other)
➋ Name of servo axis Axis name, axial mechanism (horizontal/vertical), brake mechanism (yes/no)
➌ Current condition of above axis Manufacturer Name ( ) Series Name ( ) Motor Capacity ( ) Hydraulic, Mechanical, or New System ( )
➍ Positioning accuracy ±mm±m
➎
Operation pattern
Feeding
Speed
[m/sec]
AccelerationG[m/s 2 ]
Feeding Speed[m/s]
Moving Distance[m]
(Stroke)
Reference formula
1G=9.8[m/s 2 ]1[m/s 2 ]0.1G
[m/s 2 ]V[m/sec]÷t1[sec]
D[m]V[m/sec]×(t1+t2)[sec]
Time
➏
➐
Mechanism
Mechanical structure
Ball-screw/screw-rotation type (horizontal), ball-screw/nut-rotation type (horizontal),
rack and pinion (horizontal), belt/chain (horizontal), rotary table, roll feed, instability
WTtable mass kg WLwork mass kg WAmass of other drive parts kg
WRrack mass kg WBbelt/chain mass kg WCcounterbalance mass kg
Faexternal force axial direction N Fbball-screw preload N Troll pushing force N
Dr1drive-side roll diameter mm Dr2follower-side roll diameter mm
Lr1drive-side roll length mm Lr2follower-side roll length mm Greduction ratio
JGspeed-reducer inertia kgm 2 JCcoupling inertia kgm 2
JNnut inertia kgm 2 JOother motor-axis conversion inertia kgm 2
Dbball-screw diameter mm Lbball-screw axial length mm Pbball -screw leadmm
Dppinion/pulley diameter mm Lppinion axial length mm tppully thickness mm
Dttable diameter mm Dhtable-support dianeter mm LWload shift from axis mm
Dstable shaft diameter mm Lstable shaft length mm
specific gravity of ball-screw/pinion/pulley/table-shaft material kgcm 3
friction coefficient between sheet and shiliding-surface/support-section/roll 1specific gravity of roll-1 material kgcm 3
2specific gravity of roll-2 material kgcm 3 internal friction coefficient of preload nut
mechanical efficiency JLload inertia of motor-axis conversion kgm 2
TFfriction torque of motor axis conversion Nm Tuimbalance torque of motor axis conversion Nm
➑ Speed reducer Customer-provided ()Sanyo denki standard(planet/spur/no-backlash-planet) other()
➒
Encoder type
Encoder type specified ( yes / no )
Yes: (Wiring saving incremental encoder, battery backup absolute encoder, absolute encoder for
incremental system, battery-less absolute encoder)
Resolution
❿ Input format Position , velocity , torque , other ( )
⓫ Host equipment (controller) Sequencer , laptop , customer-developed product , Sanyo dennki-provided , other ( )
⓬ Usage environment and other requirements Cutting , clean-room use , anti-dust measures , other ( )
⓭ Estimated production Single product: ( ) units/mouth ( ) units/year
⓮ Development schedule Prototype period: () Year () Month Production period: () Year () Month
⓯
Various measures Related documentation ( already submitted; send later by mail) Visit/PR desired ( yes / no ) Meeting desired ( yes / no )
⓰
Miscellaneous
(questions, pending problems,
unresolved issues, etc.)
73