25.06.2014 Views

Owners Manual - Roland

Owners Manual - Roland

Owners Manual - Roland

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Creating Organ Sounds<br />

Using a Pedal to Adjust the Volume<br />

If you connect an expression pedal, you’ll be able to use the pedal to<br />

adjust the volume of the organ sound and ensemble sound.<br />

fig.ConnectPedals.eps<br />

Other settings for the organ sound<br />

In Function mode you can make additional detailed settings<br />

for the tonewheel organ.<br />

Type of tonewheel<br />

Due to the manufacturing precision of the tonewheels and the<br />

performance of the analog circuitry, the sounds produced by<br />

the tonewheels will not be perfect sine waves. This contributes<br />

to the distinctive character of a tonewheel organ. The VR-700<br />

can simulate the sounds of four different types of tonewheels.<br />

The tonewheel type can be changed by the Function mode<br />

setting “Wheel Type” (p. 52).<br />

Expression pedal<br />

Stepping on the pedal will increase the volume, while releasing the<br />

pedal will decrease the volume.<br />

* The organ volume will not reach 0 even if you completely release<br />

expression pedal.<br />

For details on connecting an expression pedal, refer to<br />

“Connecting an Expression Pedal and Damper Pedal” (p. 20).<br />

Leakage noise<br />

On a tonewheel organ, a small amount of the signal from<br />

tonewheels unrelated to the keys you pressed will leak into the<br />

sound of the keys you pressed. This “leakage noise” is<br />

considered a drawback of tonewheel organs, but some people<br />

feel it to be an important distinctive element of these organ<br />

sounds.<br />

You can adjust the level of the leakage noise by using the<br />

Function mode setting “Leakage Level” (p. 52).<br />

Key click<br />

This is the click noise heard when you press or release a key.<br />

On the earliest traditional tonewheel organs, a “click” noise<br />

occurred when you pressed or released a key. This was initially<br />

considered a problem, but blues and rock performers began to<br />

take advantage of it in their performances, and it is now<br />

considered a distinctive aspect of some jazz sounds.<br />

The noise that is heard when you press or release a key can be<br />

adjusted in Function mode (p. 52).<br />

• Volume of noise when you press a key:<br />

Key On Click Level<br />

• Volume of noise when you release a key:<br />

Key OFF Click Level<br />

45

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!