Owners Manual - Roland
Owners Manual - Roland
Owners Manual - Roland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Various Settings (Function mode)<br />
MIDI Input/Output Settings<br />
With the Group already selected, press the [+] button or [–] button until<br />
is shown in the display.<br />
* Settings for parameters other than Local Control are saved in system memory. After editing these, press the [WRITE] button to save the<br />
settings in system memory (p. 51).<br />
Button Parameter Value Factory setting<br />
[PIANO]<br />
Local Control<br />
Internally connects (ON) or disconnects (OFF) the sound generator of<br />
the organ sounds and ensemble sounds with the keyboard and other<br />
controllers (p. 65).<br />
* To prevent problems such as there being no sound, the Local Control<br />
setting is automatically turned on when you turn on the power.<br />
* If you turn Local Control off, the keyboard unit connected to the MIDI<br />
PEDAL IN connector will be disconnected from the sound generator.<br />
OFF, ON<br />
ON<br />
(at power-up)<br />
[E.PIANO]<br />
Device ID<br />
Specifies the ID number used to identify units when using system<br />
exclusive messages to change the VR-700’s settings.<br />
17–32 17<br />
[STRINGS]<br />
Sub Keyboard Function<br />
Specifies the part that will be played by a keyboard connected to the<br />
MIDI IN connector (p. 66).<br />
OFF,<br />
-U- (UPPER),<br />
-L- (LOWER)<br />
OFF<br />
[CHOIR/SCAT]<br />
MIDI Thru Switch<br />
Specifies whether messages received at the MIDI IN connector will be<br />
transmitted from the MIDI OUT connector (p. 66).<br />
OFF, ON<br />
ON<br />
[BRASS]<br />
USB MIDI Thru Switch<br />
Specifies whether MIDI Thru will be used on the computer when the USB<br />
MIDI connector is connected to your computer (p. 67).<br />
OFF, ON<br />
OFF<br />
[SYNTH LEAD]<br />
Transmit Program Change Switch<br />
Specifies whether the corresponding MIDI message will be transmitted<br />
when you switch Favorites.<br />
OFF, ON<br />
ON<br />
[SYNTH PAD]<br />
Receive Program Change Switch<br />
Specifies whether incoming program change messages will switch<br />
Favorites.<br />
OFF, ON<br />
ON<br />
[GUITAR]<br />
[BASS]<br />
[OTHERS]<br />
Upper Organ MIDI Channel<br />
Specifies the MIDI transmit/receive channel for the upper organ (p. 65).<br />
Lower Organ MIDI Channel<br />
Specifies the MIDI transmit/receive channel for the lower organ (p. 65).<br />
Pedal Organ MIDI Channel<br />
Specifies the MIDI transmit/receive channel for the pedal organ (p. 65).<br />
1–16 1<br />
1–16 3<br />
1–16 2<br />
* The shaded parameters are stored in system memory.<br />
57