AVR600 - Arcam

SAT Device Mode
AV Device Mode
The z Device Mode button configures the CR102
to control the functions of a satellite receiver. You will
need to configure this Device Mode to work with your
equipment. Pressing this button also selects SAT as the
AVR600 source.
The a Device Mode button configures the CR102 to
control the functions of a television or other display
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects AV as the AVR600 source.
P
Toggles power between standby and on
(
& Toggles pause of playback
0 … 9
Functions as original remote number key.
!
PHONO Selects Tape input on the AVR600.
#
E SHIFT + E selects PHONO input on the
AVR600
TV/AV Toggles between the available inputs on
%
h
r
your satellite receiver
u
(RED)
S
Modifies many keys (see individual key
descriptions, below)
t
(Green)
AUX Selects multichannel (MCH) input on the
H AVR600.
o
(Yellow)
SHIFT + H selects AUX input on the
AVR600.
b
(Blue)
NET
e
Selects iPOD input on the AVR600
SHIFT + e selects network (net) internal
input on the AVR600
Navigate menus.
OK confirms a setting (equivalent to ‘Enter’
or ‘Select’ on some remotes).
M Controls Backup function, if available.
U
Performs same function as on original
remote, if available.
D
On some Satellite and Cable set top boxes
this key functions as the Guide key to open
the EPG (Electronic Program Guide).
@
Toggles the mute function.
By default this key operates the AVR600 Mute
]
Channel down
[
Channel up
- +
Decrease (–) or increase (+) AVR600 volume
) Fast rewind
$ Starts the playback
Fast forward
(not used)
Stop playback
Start recording
(not used)
Duplicates function of RED key for some
Satellite and Cable set-top boxes
Duplicates function of GREEN key for some
Satellite and Cable set-top boxes
Duplicates function of YELLOW key for some
Satellite and Cable set-top boxes
Duplicates function of BLUE key for some
Satellite and Cable set-top boxes
P
Toggles power between standby and on.
(Some TVs require you to use a number
key to turn them on.)
&
(
0 … 9
Functions as original remote number key –
usually for channel selection.
!
Phono Selects Tape input on the AVR600.
#
E SHIFT + E selects PHONO input on the
%
AVR600.
h
TV/AV Toggles between the available inputs on
r
your display device (e.g. TV/AV)
u
(RED)
S
Modifies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel (MCH) input on the
AVR600.
SHIFT + H selects AUX input on the
AVR600.
Navigate setup and programme selection
menus.
OK confirms a selection (equivalent to
‘Enter’ or ‘Select’ on some remotes).
M
EXIT function on some models.
U
Functions as original remote key, if
available.
D
Display INFO or OSD (On Screen Display)
function, if available.
@
Toggles the mute function.
By default this key operates the AVR600
Mute
]
Channel down
[
Channel up
Decrease (–) and increase (+) AVR600
- + volume.
)
Toggles TEXT page on/off
t
(Green)
o
(Yellow)
b
(Blue)
Turns Programme-In-Programme (PIP)
on, if available
Activates PIP move, if available
Activates PIP swap, if available
Activates PIP freeze, if available
Activates PIP channel up, if available
Activates PIP channel down, if available
Duplicates function of RED key for Text TV
Duplicates function of GREEN key for Text
TV
Duplicates function of YELLOW key for Text
TV
Duplicates function of BLUE key for Text
TV
E-28