AVR600 - Arcam

More documents

Recommendations

Info

network/usb operation The AVR600 is fitted with a network audio client which is capable of playing internet radio stations as well as stored music on a network storage device such as a PC, or from a USB flash drive. For information on installing the AVR600 on your network, see page 16. The AVR600 supports the following file formats: < MP3 < WMA (Windows Media Audio) < WAV < FLAC (Free Lossless Audio CODEC) < MPEG-4 AAC (iTunes) with DRM10 support < Ogg Vorbis Favourites You can store tracks or radio stations in your ‘favourites’ folder for easy access later. Once playing, pressing the FAV+ key adds the track to the ‘favourites’ folder. Pressing FAV- removes the track from the ‘favourites’ folder (this key only has an effect if the track is in the favourites folder). Selecting the playback source Selecting the network client will allow playback of internet radio stations and stored music on a networked storage device or USB memory device. To select the network source the CR102 remote must first be in AMP device mode (press A). Then press S + e on the remote to select the Network source. You can also cycle to it using the –INPUT / INPUT+ keys on the front panel. The ‘home’ page will display all available storage devices, as well as your ‘favourites’ folder. Navigate through these devices using the B, C, D and E keys. Folders that may contain playable files have a symbol, playable files have a symbol. Once you reach the track you wish to play, press OK or the 4 key. Once playing, pressing OK again or ; will pause the track. Pressing the / key skips forward one track. If the last track is reached the key is ignored. Pressing the 0 key skips back one track. If the first track is reached, the key is ignored. Pressing and holding the OK or < key for two seconds stops playback. Pressing the r key on the remote plays the tracks in the current folder in a random order. Pressing the R key on the remote repeats the current track, pressing it again repeats all the files in the current folder, pressing it again cancels the repeat function. USB playback Insert a USB device into the socket on the AVR600 and select select the network client input. The USB device appears in the list of folders that can be navigated. Navigate to the music file and press the OK or 4 key. Internet radio stations Although you can manually enter the URL of an internet radio station, the AVR600 uses the vTuner service to allow easy browsing of internet radio stations and podcasts. To set up this service for your AVR600, please visit www.arcamradio.co.uk There, you will be asked to enter the Media Access Controller (MAC) address which is the unique ID of your AVR600. This MAC address can be found in the network section of the setup menu. Once you have entered the MAC address, you can then browse stations and podcasts and set up groups of favourite stations. When you next connect your AVR600 to the internet, these groups will appear in the selection list. Pressing the INFO key will cycle what is shown on the lower right portion of the front panel display between: < Elapsed Time (default) < Processing mode < Album (if available) < Artist (if available) < File information (bitrate, type). NOTE For playback from a network device, the network device needs to running a universal plug and play (uPnP) service, such as Windows Media Player 11. This can be downloaded free of charge from www.microsoft.com or installed via the Windows update installer. Windows Vista has this functionality built in. Other free and paid-for uPnP services are available for other computer operating systems. Some network attached storage (NAS) systems include a built-in version of a uPnP service. iPod It is possible to connect an iPod to your AVR600 using either the Arcam rLead or rDock accessories (please contact your dealer). Connect the 9-way plug into the socket marked ‘rLead/rDock’ and the audio leads to the AV input. If your iPod has video output and you are using the rDock, connect the composite and S-Video leads to the AV video inputs. To select the iPod input, press the e key on the remote while in AMP Device Mode, or cycle to it using the – input / input + keys on the front panel. E-46
external amplifiers English Analogue pre-amplifier outputs All pre-amplifier analogue outputs are buffered, have a low output impedance and are at line level. They are able to drive long cables or several inputs in parallel if required. R, L, C Connect these to the equivalent (Right, Left and Centre) front channels of your power amplifier. SW1 Main subwoofer output. Connect this to the input of your active subwoofer, if present. SW2, SW3 Subwoofer 2 and Subwoofer 3 auxiliary outputs. These are equivalent to SW1 but they allow the use of multiple subwoofers. SR, SL Surround Right and Surround Left outputs. Connect these to the Surround Right and Left power amplifier inputs. SBR, SBL Surround Back Right and Surround Back Left outputs (only used in 6.1 and 7.1 channel systems). Connect these to the Surround Back Right and Surround Back Left power amplifier inputs. For 6.1 channel speaker configurations, connect the single Surround Back power amplifier to the SBL output. E-47
Page 1 and 2: English AVR600 Handbook AVR surroun
Page 3 and 4: consignes de sécurité ATTEN
Page 5 and 6: Contents Thank you and congratulati
Page 7 and 8: Placing the unit Power Interconnect
Page 9 and 10: ear panel connectors Video connecto
Page 11 and 12: Zone 3 connectors Z3 OUT Connect th
Page 13 and 14: E-11 English
Page 15 and 16: Connecting an iPod using the Arcam
Page 17 and 18: English FM AM Connecting an aerial
Page 19 and 20: English Trigger connectors The
Page 21 and 22: Centre The centre speaker allows fo
Page 23 and 24: Using Zone 2 and 3 Extended front p
Page 25 and 26: emote control The CR102 universal r
Page 27 and 28: Controlling other devices Code blin
Page 29 and 30: Network commands The AVR600 Network
Page 31 and 32: PVR Device Mode The v Device Mode b
Page 35 and 36: auto speaker setup There is a propr
Page 37 and 38: Input Config. The audio and video s
Page 39 and 40: loud) volume exceeds this value. It
Page 41 and 42: Out 1 & 2 Resolution - This setting
Page 43 and 44: Multi-channel source modes Digital
Page 47: is displayed and audio is muted. If
Page 51 and 52: Multi-room connection guide Zone 3
Page 53 and 54: Creating Macros You can program you
Page 55 and 56: Mode key IR punch-through The Mode
Page 57 and 58: Problem Check that... Problem Check
Page 59 and 60: product guarantee Worldwide Guarant
Page 61 and 62: Harwood 0039 0067 0586 0517 Hauppau
Page 63 and 64: VCR Accent 0102 Admiral 0078 Advent
Page 65 and 66: Bush 0743 0725 0863 1725 0760 0861
Page 67 and 68: Smart 1303 0162 0329 1143 1262 0743

AVR600 - Arcam

Create successful ePaper yourself

Delete template?

Save as template?