You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[16:9] [4:3 Full]<br />
Directly displays the image at 16:9<br />
without distortion (anamorphic).<br />
[14:9] [Zoom1]<br />
Displays the image at the standard<br />
14:9 without distortion.<br />
Displays a 4:3 image enlarged<br />
horizontally to fit the screen.<br />
● For Digital TV or HD signal<br />
/<br />
Displays a 16:9 letterbox or 4:3 image<br />
without distortion.<br />
[Just] [Zoom2]<br />
Displays a 4:3 image full-screen.<br />
Stretching is only noticeable at the left<br />
and right edges.<br />
Displays a 16:9 letterbox (anamorphic)<br />
image full-screen without distortion.<br />
Watching TV<br />
[4:3] [Zoom3]<br />
Displays the image at the standard 4:3<br />
without distortion.<br />
Displays a 2.35:1 letterbox<br />
(anamorphic) image full-screen without<br />
distortion.<br />
At 16:9, displays the image at its<br />
maximum (with slight enlargement).<br />
Note<br />
● Only [16:9] and [4:3 Full] are available in Digital TV. /<br />
● Aspect is fixed to [16:9] in Digital TV.<br />
● Only [16:9] and [4:3] are available in PC input mode.<br />
● Aspect cannot be changed in 3D mode.<br />
● Aspect cannot be changed in teletext service.<br />
● Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in<br />
Digital TV.<br />
Last view<br />
Switch to previously viewed channel or input mode easily<br />
● Press again to return to the current view.<br />
Note<br />
● Switching channel is not available while the recording of Timer Programming or One Touch Recording is in progress.<br />
/<br />
● Switching channel is not available while One Touch Recording is in progress.<br />
● Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.<br />
24<br />
Standard Time / Summer Time /<br />
■ Region Select - Adjust the standard time<br />
Select the region where you live to adjust the standard time.<br />
● The time contained in the broadcast signal is UTC (Universal Time coordinated) formally known as GMT (Greenwich<br />
Mean Time).<br />
■ Daylight Saving Time - Adjust for Summer Time<br />
Select time offset from the standard time for Summer Time.<br />
● Normally select [Auto].<br />
● If there is a gap between displayed time and actual time, set this function.<br />
Region Standard time Daylight Saving Time : Auto (During Summer Time)<br />
NSW / ACT<br />
Victoria<br />
+10:00 +11:00<br />
Queensland +10:00<br />
South Australia +9:30 +10:30<br />
Western Australia +8:00<br />
Northern Territory +9:30<br />
Tasmania +10:00 +11:00<br />
● These items can be set from [Other Settings] in the Setup Menu. (p. 48) (Based on GMT)
Change language