You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
■ To edit a timer programming event<br />
Select the event<br />
● To change a timer programming event<br />
Correct as necessary (p. 54)<br />
● To cancel a timer programming event temporarily<br />
• Each time pressed:<br />
Timer off: cancel<br />
Timer on: stop cancelling<br />
● To delete a timer programming event<br />
■ To unlock the tuner and stop recording<br />
Note<br />
● Check that the LED is orange. If not, timer programming events are not active or not stored.<br />
● Timer Programming reminder messages will remain displayed until one of the following occurs:<br />
• You press the OK button to view the programme or the EXIT button to cancel the reminder.<br />
• The timer programming event that the reminder is set for ends.<br />
● “!” identifies that two or more timer programming events are overlapped. [USB HDD Rec.] and [SD Card Rec.]<br />
are given priority over [Reminder]. As for the overlapped recording events, the first event starts and finishes as<br />
programmed. The next event can then start.<br />
● The recording of Timer Programming will automatically change to the programmed channel a few seconds before the<br />
start time.<br />
● The recording of Timer Programming will be performed even if the TV is in [REW LIVE TV] recording (p. 64) or<br />
[Pause Live TV] recording (p. 90). In this case, [REW LIVE TV] recording or [Pause Live TV] recording will be<br />
cancelled.<br />
Timer Programming<br />
55
Change language