Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Reduce unnecessary power consumption in Standby [Standby Power Save]<br />
Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 48)<br />
The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation<br />
with the TV On / Off state to reduce the consumption.<br />
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power<br />
consumption of the connected equipment is automatically minimised.<br />
When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased<br />
to make startup time fast.<br />
● This function is effective if the connected equipment can change the power consumption in Standby mode and is set<br />
to higher consumption.<br />
● This function works when [Power off Link] is set to [On].<br />
Auto standby for unnecessary equipment [Intelligent Auto Standby]<br />
Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function<br />
[Intelligent Auto Standby] (p. 48)<br />
When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reduce<br />
the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is<br />
changed to [TV] (except for watching a disc).<br />
● If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns to<br />
standby.<br />
● This function may not work properly depending on the connected equipment. If required, set to [Off].<br />
Direct TV Recording - What you see is What you record [Direct TV Rec]<br />
Records the current programme in the DIGA Recorder immediately.<br />
● If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA<br />
Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders,<br />
connect the DIGA Recorder to HDMI1.<br />
● If you cannot operate, check the settings and the equipment.<br />
“Summary of features” (p. 86, 87), “Preparations” (p. 88)<br />
1<br />
Display [VIERA TOOLS] and select [VIERA Link]<br />
VIERA Link<br />
select<br />
access<br />
Link Functions (VIERA Link)<br />
2<br />
Select [Direct TV Rec] and start recording<br />
VIERA Link Menu<br />
Pause Live TV<br />
Direct TV Rec<br />
VIERA Link Control<br />
Speaker Selection<br />
Start<br />
Start<br />
Recorder<br />
Home Cinema<br />
select<br />
access / start<br />
■ To stop recording<br />
Select [Stop] in [Direct TV Rec]<br />
VIERA Link Menu<br />
Pause Live TV<br />
Direct TV Rec<br />
VIERA Link Control<br />
Speaker Selection<br />
Start<br />
Stop<br />
Recorder<br />
Home Cinema<br />
select<br />
access / stop<br />
89
Change language