You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Timer Programming /<br />
Timer Programming from Menu<br />
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the<br />
USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby<br />
mode.<br />
TV Guide may also be used to set timer programming event (p. 26).<br />
● This function is not available in Analogue TV.<br />
● Timer Programming can store up to 15 events.<br />
● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or<br />
service provider.<br />
● For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, the<br />
TV must be on.<br />
● No other channel can be selected while the recording of Timer Programming is in progress.<br />
● Recording an encrypted (copy-protected) programme may not be possible.<br />
● For more information of the USB HDD / SD Card Recording (p. 61, 102)<br />
● 2 minutes before the starting time, a reminder message appears if you are watching TV.<br />
• To remove the message and start the programming • To cancel the programming<br />
1<br />
2<br />
3<br />
Select Digital TV<br />
(p. 21)<br />
Display the menu and select [Timer]<br />
Timer<br />
Select [Timer Programming]<br />
Timer Programming<br />
Off Timer<br />
Auto Standby<br />
Access<br />
Off<br />
Off<br />
select<br />
access<br />
select<br />
access<br />
Timer Programming<br />
53
Change language