Using - Big Brown Box

Set all channels automatically [Auto Tuning]
Automatically retune all channels received in the area.
1 Start Auto Tuning 2 Settings are made automatically
Example: Digital TV Example: Digital TV
Digital TV Auto Tuning
Digital TV Auto Tuning
Scan
CH 6 69
All digital TV tuning data will be erased
This will take about 3 minutes.
RF Ch Channel Name Type Quality
32 TV Fin land
Digital TV 9
32 Boxer Navigator
Digital TV 9
32 SVT HD
Digital TV 9
Digital TV: 4
Searching
● All the previous tuning settings are erased.
● When the operation is completed, the channel at the lowest position will be displayed.
● Search begins in the order from the lower channels to the higher channels.
● If tuning has not been done completely [Manual Tuning] (see below)
Set Digital TV channel manually [Manual Tuning]
Normally use [Auto Tuning] or [Update Channel List] to retune Digital TV channels.
If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.
● All channels found will be added to the Channel List.
Digital TV Manual Tuning
Physical Channel
[CH21]
474.00 MHz
Signal Quality
0
10
Signal Strength
0
10
No. Channel Name Type New
Digital TV: 0
select physical channel
select offset
start tuning
Set Analogue TV channel manually [Manual Tuning]
Set Analogue TV channel manually after Auto Tuning.
● If a VCR is connected only with the RF cable, select channel position [0].
Analogue TV Manual Tuning
0
CH 57
Manual Tuning
0 75
Store
Tuning and Editing Channels
1 Select the channel position 2 Select the channel
3 Search 4 Select [Store]
select
store
51