Mustek DVD V520

Press Down key twice
Ver 4001 = macrovision enable
Ver 4000 = macrovision disable
Press left () key
Acoustic Solutions DVD551
Switch machine on with no disc in it and Press "Set-up" on remote. Then push
Press Next > Stop > Pause > Prev > Next. This will bring up Region ID, up arrow
to "bypass" for all regions. Press "Select/play" for confirmation.
Afreey ADV-2360
Turn on the ADV-2360 without a disc in and open the Player Tray. Press SETUP
on the remote to go to the set-up menu. Press in sequence the following buttons:
ZOOM, PREV, NEXT. Then on the top of the screen you will see "XX1XX". With the
arrows on the remote, press left or right to change until the desired region
number appears. After region is selected, press SETUP to go back to the main
screen.
Afreey LD-2060
Multiregion: type 38883 on remote.
Macrovision Hack: Enter SETUP with remote then enter 590419 to enter "loop
hole" menu. Cursor to macrovision & set to OFF.
Afreey PDV-2000
Code 1;
Turn on the PDV-2000 without a disc in. Press SETUP on the remote to go to the
set-up menu, press in sequence the following buttons: SUB-T, ZOOM, PREV,
NEXT. Then on the top of the screen you will see "XX1XX". With the arrows on the
remote, press left or right to change until the desired region number appears.
After region is selected, press SETUP to go back to the main screen.
Code 2;
To change the regions, use the remote control and Push the following sequence of
buttons: SETUP, +10, PREV, NEXT.
A screen will appear which will show you what region the DVD player is in. Use
the left and right arrows to select the region you want to play. When you have
selected the region press the SETUP button to exit. Power off the DVD player,
when you power on the DVD player it will select the new region. Please note that
you can select region 0 which is a bypass region, which will allow you to play any
region.
Aiwa XD-DV170