Electrical Schematics (EST 100 ... - UAW-Chrysler.com

$33/,(',1'8675,$/7(&+12/2*<
&$7,$)25722/0$.(5662/,'6
October 2003-September 2004
&2856(&77
2 Hours
&2856('(6&5,37,21
The tool maker should gain the tools necessary to visualize, analyze, plot, and create simple dimensional
drawings of CATIA generated tooling components, including process CATIA model files as released by the
Tool Design Group of DaimlerChrysler.
/($51,1*287&20(
The successful completion of this course should enable the tool maker to gain dimensional and mathematical
information to create tooling components by demonstrating the following tasks:
1. review of Introduction and Fundamentals course materials;
2. cut sections through CATIA solid geometry;
3. review and plot CATIA drawing DRAFTs;
4. use layers and apply Filters to tool components and sections;
5. analyze tool model file geometry;
6. create simple drawings with text and dimensions; and,
7. overlay released car part model files with tools.
&2856(2%-(&7,9(
The tool maker should have the experience and skills to create simple dimensional drawings of CATIA
generated tooling components including DaimlerChrysler Tool Design Group model files.
0$-25723,&6&29(5('
• Sections through CATIA solid geometry
• Review and plot CATIA drawing drafts
• Use layers and apply filters to tool components and sections
• Analyze tool model file geometry
• Create simple drawings with text and dimensions
• Overlay released car parts model files with multiple and single tool models
35(5(48,6,7(6
Participants must have completed Introduction to CATIA & VPM for Manufacturing (CTT 001) and CATIA
Fundamentals (CTT 200). All participants should also possess fundamental keyboarding skills along with a
basic knowledge of blueprint reading.
&/$666,=( 8
&2856('85$7,2140 Hours
6(66,21'$7(6
November 17-21 January 26-30
April 19-23
August 23-27
11