Electrical Schematics (EST 100 ... - UAW-Chrysler.com

:(/',1*
$'9$1&('6758&785$/67((/:(/',1*
October 2003-September 2004
&2856(:77
&2856('(6&5,37,21
The participant welds structural steel in all welding positions using the Shielded Metal Arc and Flux
Cored Arc welding processes.
/($51,1*287&20(
Upon the successful completion of the course the participant should be able to:
1. set up and adjust shielded metal arc welding equipment;
2. set up and adjust flux cored arc welding equipment;
3. prepare structural steel for welding;
4. weld structural steel in all welding positions; and,
5. weld complete penetration fillet and groove welds in the vertical and overhead positions.
&2856(2%-(&7,9(
To provide participants with the ability to produce quality welds on structural steel in all welding
positions.
0$-25723,&6&29(5('
• Electrode selection for welding structural steel welding with the SMAW process
• Self shielded and gas shielded electrode wires for FCAW welding structural steel
• Techniques for groove welds with and without backing
• Visual and destructive weld examination
35(5(48,6,7(6
All participants should have completed Structural Steel Welding (WTT 200). In addition, all
participants must meet one of the following requirements: completion of Welding Safety & Overview
of Processes (WPT 100), or certification from a welding safety course.
&/$666,=(6
&2856('85$7,21 40 hours
6(66,21'$7(6
October 27-31
February 2-6
May 24-28
August 16-20
88