Electrical Schematics (EST 100 ... - UAW-Chrysler.com

:(/',1*
6758&785$/67((/:(/',1*
October 2003-September 2004
&2856(:77
2 Hours
&2856('(6&5,37,21
The participant should be able to prepare structural steel for welding; set up and adjust welding
equipment; and weld structural steel in flat and horizontal positions.
/($51,1*287&20(
The successful completion of this course should provide the participant with a thorough technical
understanding of:
1. Shielded Metal Arc (stick) and Flux Cored Arc Welding (FCAW) fundamentals;
2. welding safety;
3. setup and adjustment of arc welding machines;
4. electrode classifications and selection; and,
5. the hands-on skills needed to produce welds in both flat and horizontal positions.
(Note: Vertical and Overhead position welding is not offered in this course.)
&2856(2%-(&7,9(
To enable the participant to produce acceptable quality welds on structural steel using the shielded
metal arc and flux-cored welding processes.
0$-25723,&6&29(5('
• Material specification
• Weld joint design
• Tacking and fit up
• Filler metal selection
• Welding techniques
• Storage of low hydrogen electrode
• Setup and adjustment of equipment
35(5(48,6,7(6
Participants must meet ONE of the following: completion of Welding Safety & Overview of
Processes (WPT 100), equivalent welding safety training at a community college, or certification
from a welding safety course.
&/$666,=(6
&2856('85$7,21 40 hours
6(66,21'$7(6
October 6-10
January 26-30 June 14-18
February 23-27 August 9-13
March 22-26 September 13-17
May 3-7
87