TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
a) When the control paddle is hanging in the normal position,<br />
the resistance at the red K4 connector will be 7.9 K<br />
ohms and the unit will start.<br />
BIN EMPTY<br />
Priximity switch<br />
closed.<br />
Mechanical control in the normal position supplies 7.9 K<br />
ohms at red K4 connector to start unit.<br />
b) When the unit is held to the right, the resistance at the<br />
K4 red connector will be 15.8 K ohms and the unit will shut<br />
down within 3 seconds during the first 5 minutes of the<br />
freeze cycle or at the beginning of the next freeze cycle at<br />
any other time in the sequence of operation.<br />
BIN FULL<br />
Proximity switch<br />
open.<br />
Mechanical bin control in the full right position supplies<br />
15.8 K ohms at connector red K4 to shut unit down.<br />
Note: Control board dip switch number 7 must be ON for<br />
this control to operate the unit.<br />
3. CAPACATIVE PROXIMITY SWITCH: KM-1300NRF<br />
This control is used only on the KM-1300NRF model which<br />
was designed tor 42 inch beverage dispenser applications.<br />
You will find it only on this specific model. The control<br />
works by sencing mass (in this case, ice) within 1/2 to 1<br />
30<br />
12/01/02 12/20/03<br />
2/20/03
Change language