TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
TECH - SPEC'S Technician's Pocket Guide - Hoshizaki America, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KM INSTALLATION<br />
GENERAL -<br />
The ice machine is not intended for outdoor use.<br />
OPERATING CONDITIONS - ALL MODELS<br />
ITEM MODEL RANGE<br />
Voltage Range 115V units 104 - 127V.<br />
208-230 V units 187 - 264 V.<br />
220-240 or 230V 198 - 254V.<br />
Ambient Temperature All 45 - 100 Deg. F.<br />
Remote Condenser -20 - 122 Deg. F.<br />
Water Supply Temperature All 45 - 90 Deg. F.<br />
Water Supply Pressure All 10 -113 PSIG<br />
Allow 6" clearance at rear, sides, and top for proper air<br />
circulation and ease of maintenance or service. 20" top<br />
clearance for F/DCM.<br />
PLUMBING REQUIREMENTS -<br />
Water Supply:<br />
On KM units the water supply line size is critical due to<br />
the water assisted harvest and the use of a ported inlet<br />
water valve solenoid.<br />
MODEL Line Size Fitting Size<br />
KM-150 - KM-900 3/8" OD 1/2 FPT<br />
KM-1300 - KM-2400 1/2" OD 1/2 FPT<br />
All F/DCM 3/8" OD 1/2 FPT<br />
*Water cooled condenser units require two separate<br />
supplies sized as per list above.<br />
Drain:<br />
MODEL Line Size Fitting Size<br />
All Bins 3/4" OD 3/4 FPT<br />
All KM/KML’s 3/4" OD 3/4 FPT<br />
Flakers 3/4" OD 3/4 FPT*<br />
DCM 3/4" OD 3/4 FPT*<br />
*Some models have 2 drain outlets.<br />
Water Cooled Condenser outlet:<br />
KM-150BWF, KM-250BWF, KM-1600SWH,<br />
KM-1600SWH3, KM-2000SWH3 have 1/2” FPT outlet.<br />
All other KM models, All KML, All Flaker, All DCM have 3/8”<br />
FPT outlet.<br />
8<br />
12/01/02 12/20/03<br />
2/20/03
Change language