VC1000 Focus Guide - ProLon
VC1000 Focus Guide - ProLon
VC1000 Focus Guide - ProLon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VAV Controller<br />
www.prolon.net<br />
2.1.6 Radiant Floor Configuration<br />
Figure 2.1.14: Radiant Floor configuration screen<br />
This screen can only be accessed when an output on the VAV Controller is set to Radiant<br />
Floor (see Output Configuration screen, p.20).<br />
2.1.6.1 Limits<br />
The Slab Temperature Setpoint is determined using a scale defined by the minimum and<br />
maximum slab temperatures. The Calculated Output Level that determines the Slab<br />
Temperature Setpoint is defined by the configuration of the output selected to control the<br />
radiant floor (see p.20):<br />
Slab Temperature<br />
Max Slab<br />
Temp<br />
Slab<br />
Temperature<br />
Setpoint<br />
Min Slab<br />
Temp<br />
0%<br />
Calculated Output<br />
Level<br />
100%<br />
Example<br />
21<br />
www.prolon.net<br />
info@prolon.net
Change language