VC1000 Focus Guide - ProLon
VC1000 Focus Guide - ProLon
VC1000 Focus Guide - ProLon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VAV Controller<br />
www.prolon.net<br />
2.2.3 Lon Configuration<br />
Figure 2.2.3 LON configuration screen<br />
This screen lets you configure the parameters that are exclusive to the LON protocol.<br />
This screen cannot be accessed if the LON plug-in card is not connected to the VAV<br />
Controller board.<br />
• Max Send Time: The maximum amount of time that can elapse between two<br />
sequential transmissions of the same NVO. Even if the NVO has not changed, it will<br />
still be sent when this delay expires. (SCPTmaxSendTime)<br />
Units MIN MAX Default<br />
Seconds 5 6550 40<br />
• Min Send Time: The minimum amount of time that must elapse between two<br />
sequential transmissions of the same NVO. Even if the NVO changes frequently, it<br />
can only be sent once this delay expires. (SCPTminSendTime)<br />
Units MIN MAX Default<br />
Seconds 0 6550 3<br />
37<br />
www.prolon.net<br />
info@prolon.net
Change language