WattSoft3 USER'S GUIDE - Metermanager.co.uk

More documents

Recommendations

Info

DUAL TIME PERIOD This window enables the user to set the beginning/end time of the two time periods by means of either the scrolling bar or the boxes on the left side. In the dual time period energy management, it is possible to set two time intervals (Time 1 and Time 2) and to associate the relevant tariff (Tariff 1 and Tariff 2): the configuration can be carried out by means of the boxes on the right part of the window. Reset is used to reset the configuration. Define costs allows you to enter the “Define cost parameters” boxes of the two tariffs. OK: exit saving the modifications. ESC: exit without saving the modifications. WattSoft3 v.3.xx - User guide 31
TOTAL DATA This box displays the Main Instrument data (the data of the real instrument whose address is 1 or the data of the virtual instrument (see INSTRUMENT NETWORK paragraph). The basic variables or the additional ones are displayed according to the position of the basic meas./add. measurements selector. The Users field displays the label given to the instrument on the alarm set-up box. The presence of an alarm is indicated by means of a flashing red LED, placed close to the relevant variable box. Once an alarm, set as latch alarm, is called off the LED remains red and can be reset only by the Reset Latch key (password protected). When a non-latch type alarm is called out, the relevant LED becomes green again. WattSoft3 v.3.xx - User guide 32
Page 1 and 2: WattSoft3 Energy Management Softwar
Page 3 and 4: location. The rights granted to the
Page 5 and 6: TABLE OF CONTENTS COPYRIGHT........
Page 7 and 8: WattSoft3 INTRODUCTION OPERATING MA
Page 9 and 10: SYSTEM REQUIREMENTS In order to ope
Page 11 and 12: MAIN MENU After the program is laun
Page 13 and 14: SET-UP The Set-up menu allows the u
Page 15 and 16: New password allows the user to cho
Page 17 and 18: Additional Variables enables the us
Page 19 and 20: INSTRUMENT NETWORK The configuratio
Page 21 and 22: Main Instrument: by means of this k
Page 23 and 24: ALARM MANAGEMENT In this box, it is
Page 25 and 26: ADDITIONAL VARIABLES Double-click o
Page 27 and 28: Printing Interval defines the inter
Page 29 and 30: Monthly cost per kW. AxB) Amount Mo
Page 31: kW dmd enables the user to set the
Page 35 and 36: SINGLE DATA The data relevant to al
Page 37 and 38: ALARM This page shows the whole lis
Page 39 and 40: value is the average of the previou
Page 41 and 42: autoranging view, the (Y) button mu
Page 43 and 44: DMD LIMIT GRAPH This function displ
Page 45 and 46: - Instrument n selector: selection
Page 47 and 48: MANUAL LOAD ACTIVATION The Manual L
Page 49 and 50: APPENDIX A: WIRING DIAGRAMS The con
Page 51 and 52: A.3 96x96 Energy Management family
Page 53 and 54: A.5 SPT-90/PQT-90 In SPT-90 and PQT
Page 55 and 56: - Month.txt: this file includes the

WattSoft3 USER'S GUIDE - Metermanager.co.uk

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?